Lines Matching +full:axi +full:- +full:ports

1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
4 ---
5 $id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11   - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
15   color space conversion, LUT, pixel format conversion, etc. An MIPI CSI-2 input and
16   parallel (including ITU-R BT.656) input are provided as the image sensor interface.
21       - enum:
22           - renesas,r9a07g044-cru       # RZ/G2{L,LC}
23           - renesas,r9a07g054-cru       # RZ/V2L
24       - const: renesas,rzg2l-cru
32   interrupt-names:
34       - const: image_conv
35       - const: image_conv_err
36       - const: axi_mst_err
40       - description: CRU Main clock
41       - description: CRU Register access clock
42       - description: CRU image transfer clock
44   clock-names:
46       - const: video
47       - const: apb
48       - const: axi
50   power-domains:
55       - description: CRU_PRESETN reset terminal
56       - description: CRU_ARESETN reset terminal
58   reset-names:
60       - const: presetn
61       - const: aresetn
63   ports:
64     $ref: /schemas/graph.yaml#/properties/ports
68         $ref: /schemas/graph.yaml#/$defs/port-base
75             $ref: video-interfaces.yaml#
79               hsync-active: true
80               vsync-active: true
81               bus-width: true
82               data-shift: true
88           CSI-2 receiver.
91       - port@0
92       - port@1
95   - compatible
96   - reg
97   - interrupts
98   - interrupt-names
99   - clocks
100   - clock-names
101   - resets
102   - reset-names
103   - power-domains
108   # Device node example with CSI-2
109   - |
110     #include <dt-bindings/clock/r9a07g044-cpg.h>
111     #include <dt-bindings/interrupt-controller/arm-gic.h>
114         compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";
119         interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
123         clock-names = "video", "apb", "axi";
124         power-domains = <&cpg>;
127         reset-names = "presetn", "aresetn";
129         ports {
130             #address-cells = <1>;
131             #size-cells = <0>;
134                 #address-cells = <1>;
135                 #size-cells = <0>;
140                     remote-endpoint = <&ov5642>;
141                     hsync-active = <1>;
142                     vsync-active = <1>;
147                 #address-cells = <1>;
148                 #size-cells = <0>;
153                     remote-endpoint = <&csi_cru_in>;