Lines Matching +full:power +full:- +full:active +full:- +full:low
7 as spi-gpio. See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml),
10 exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
18 explained later in brcm,link-signal-sources). Even if a LED is hardware
24 - compatible : should be "brcm,bcm6328-leds".
25 - #address-cells : must be 1.
26 - #size-cells : must be 0.
27 - reg : BCM6328 LED controller address and size.
30 - brcm,serial-leds : Boolean, enables Serial LEDs.
32 - brcm,serial-mux : Boolean, enables Serial LEDs multiplexing.
34 - brcm,serial-clk-low : Boolean, makes clock signal active low.
36 - brcm,serial-dat-low : Boolean, makes data signal active low.
38 - brcm,serial-shift-inv : Boolean, inverts Serial LEDs shift direction.
41 Each LED is represented as a sub-node of the brcm,bcm6328-leds device.
43 LED sub-node required properties:
44 - reg : LED pin number (only LEDs 0 to 23 are valid).
46 LED sub-node optional properties:
47 a) Optional properties for sub-nodes related to software controlled LEDs:
48 - label : see Documentation/devicetree/bindings/leds/common.txt
49 - active-low : Boolean, makes LED active low.
51 - default-state : see
53 - linux,default-trigger : see
56 b) Optional properties for sub-nodes related to hardware controlled LEDs:
57 - brcm,hardware-controlled : Boolean, makes this LED hardware controlled.
59 - brcm,link-signal-sources : An array of hardware link
65 - brcm,activity-signal-sources : An array of hardware activity
74 leds0: led-controller@10000800 {
75 compatible = "brcm,bcm6328-leds";
76 #address-cells = <1>;
77 #size-cells = <0>;
82 active-low;
87 active-low;
92 active-low;
93 label = "green:power";
94 default-state = "on";
98 brcm,hardware-controlled;
102 brcm,hardware-controlled;
106 brcm,hardware-controlled;
110 brcm,hardware-controlled;
115 leds0: led-controller@10001900 {
116 compatible = "brcm,bcm6328-leds";
117 #address-cells = <1>;
118 #size-cells = <0>;
120 brcm,serial-leds;
121 brcm,serial-dat-low;
122 brcm,serial-shift-inv;
126 brcm,hardware-controlled;
127 brcm,link-signal-sources = <0>;
131 brcm,hardware-controlled;
132 brcm,link-signal-sources = <1>;
136 active-low;
141 active-low;
146 active-low;
151 active-low;
156 active-low;
161 brcm,hardware-controlled;
165 brcm,hardware-controlled;
169 brcm,hardware-controlled;
173 brcm,hardware-controlled;
177 brcm,hardware-controlled;
181 brcm,hardware-controlled;
185 brcm,hardware-controlled;
189 active-low;
190 label = "green:power";
191 default-state = "on";
196 leds0: led-controller@10001900 {
197 compatible = "brcm,bcm6328-leds";
198 #address-cells = <1>;
199 #size-cells = <0>;
204 brcm,hardware-controlled;
205 brcm,link-signal-sources = <0>;
206 brcm,activity-signal-sources = <0>;
211 brcm,hardware-controlled;
212 brcm,activity-signal-sources = <1>;
217 brcm,hardware-controlled;
218 brcm,link-signal-sources = <4>;
223 brcm,hardware-controlled;
224 brcm,link-signal-sources = <5>;
229 brcm,hardware-controlled;
230 brcm,link-signal-sources = <6>;
235 brcm,hardware-controlled;
236 brcm,link-signal-sources = <7>;
241 active-low;
242 label = "green:power";
243 default-state = "on";
248 leds0: led-controller@10001900 {
249 compatible = "brcm,bcm6328-leds";
250 #address-cells = <1>;
251 #size-cells = <0>;
256 brcm,hardware-controlled;
257 brcm,link-signal-sources = <0 1>;
258 brcm,activity-signal-sources = <0 1>;
263 brcm,hardware-controlled;
264 brcm,link-signal-sources = <4 5 6 7>;
269 active-low;
270 label = "green:power";
271 default-state = "on";
276 leds0: led-controller@10001900 {
277 compatible = "brcm,bcm6328-leds";
278 #address-cells = <1>;
279 #size-cells = <0>;
284 brcm,hardware-controlled;
285 brcm,link-signal-sources = <0>;
286 brcm,activity-signal-sources = <0 1>;
291 brcm,hardware-controlled;
292 brcm,link-signal-sources = <7>;
297 brcm,hardware-controlled;
298 brcm,link-signal-sources = <6>;
303 brcm,hardware-controlled;
304 brcm,link-signal-sources = <5>;
309 brcm,hardware-controlled;
310 brcm,link-signal-sources = <4>;
315 active-low;
316 label = "green:power";
317 default-state = "on";