Lines Matching +full:wakeup +full:- +full:active +full:- +full:high

5 -------------------------
8 "interrupts" property, an "interrupts-extended" property, or both. If both are
16 	interrupt-parent = <&intc1>;
19 The "interrupt-parent" property is used to specify the controller to which
25 The "interrupts-extended" property is a special form; useful when a node needs
31 	interrupts-extended = <&intc1 5 1>, <&intc2 1 0>;
34 -----------------------------
36 A device is marked as an interrupt controller with the "interrupt-controller"
37 property. This is a empty, boolean property. An additional "#interrupt-cells"
45   -----------
46   The #interrupt-cells property is set to 1 and the single cell defines the
52 		compatible = "arm,versatile-vic";
53 		interrupt-controller;
54 		#interrupt-cells = <1>;
59 		compatible = "arm,versatile-sic";
60 		interrupt-controller;
61 		#interrupt-cells = <1>;
63 		interrupt-parent = <&vic>;
68   ------------
69   The #interrupt-cells property is set to 2 and the first cell defines the
72     - bits[3:0] trigger type and level flags
73         1 = low-to-high edge triggered
74         2 = high-to-low edge triggered
75         4 = active high level-sensitive
76         8 = active low level-sensitive
81 		gpioext: gpio-adnp@41 {
82 			compatible = "ad,gpio-adnp";
85 			interrupt-parent = <&gpio>;
88 			gpio-controller;
89 			#gpio-cells = <1>;
91 			interrupt-controller;
92 			#interrupt-cells = <2>;
94 			nr-gpios = <64>;
101 			interrupt-parent = <&gpioext>;
104 			#address-cells = <1>;
105 			#size-cells = <0>;
112 3) Interrupt wakeup parent
113 --------------------------
116 interrupts routed to them, so that they can wakeup the SoC from suspend. These
118 controller and can be specified by the "wakeup-parent" property and contain a
119 single phandle referring to the wakeup capable interrupt controller.
122 	wakeup-parent = <&pdc_intc>;