Lines Matching +full:reg +full:- +full:property
5 -------------------------
8 "interrupts" property, an "interrupts-extended" property, or both. If both are
16 interrupt-parent = <&intc1>;
19 The "interrupt-parent" property is used to specify the controller to which
21 controller node. This property is inherited, so it may be specified in an
23 "interrupts" property are always in reference to the node's interrupt parent.
25 The "interrupts-extended" property is a special form; useful when a node needs
27 the inherited one. Each entry in this property contains both the parent phandle
31 interrupts-extended = <&intc1 5 1>, <&intc2 1 0>;
34 -----------------------------
36 A device is marked as an interrupt controller with the "interrupt-controller"
37 property. This is a empty, boolean property. An additional "#interrupt-cells"
38 property defines the number of cells needed to specify a single interrupt.
45 -----------
46 The #interrupt-cells property is set to 1 and the single cell defines the
52 compatible = "arm,versatile-vic";
53 interrupt-controller;
54 #interrupt-cells = <1>;
55 reg = <0x10140000 0x1000>;
59 compatible = "arm,versatile-sic";
60 interrupt-controller;
61 #interrupt-cells = <1>;
62 reg = <0x10003000 0x1000>;
63 interrupt-parent = <&vic>;
68 ------------
69 The #interrupt-cells property is set to 2 and the first cell defines the
72 - bits[3:0] trigger type and level flags
73 1 = low-to-high edge triggered
74 2 = high-to-low edge triggered
75 4 = active high level-sensitive
76 8 = active low level-sensitive
81 gpioext: gpio-adnp@41 {
82 compatible = "ad,gpio-adnp";
83 reg = <0x41>;
85 interrupt-parent = <&gpio>;
88 gpio-controller;
89 #gpio-cells = <1>;
91 interrupt-controller;
92 #interrupt-cells = <2>;
94 nr-gpios = <64>;
99 reg = <0x2b>;
101 interrupt-parent = <&gpioext>;
104 #address-cells = <1>;
105 #size-cells = <0>;
113 --------------------------
118 controller and can be specified by the "wakeup-parent" property and contain a
122 wakeup-parent = <&pdc_intc>;