Lines Matching +full:norequest +full:- +full:mask

2 ----------------
5  - compatible: "st,stmpe-ts"
8 - st,ave-ctrl		: Sample average control
9 				0 -> 1 sample
10 				1 -> 2 samples
11 				2 -> 4 samples
12 				3 -> 8 samples
13 - st,touch-det-delay	: Touch detect interrupt delay (recommended is 3)
14 				0 -> 10 us
15 				1 -> 50 us
16 				2 -> 100 us
17 				3 -> 500 us
18 				4 -> 1 ms
19 				5 -> 5 ms
20 				6 -> 10 ms
21 				7 -> 50 ms
22 - st,settling		: Panel driver settling time (recommended is 2)
23 				0 -> 10 us
24 				1 -> 100 us
25 				2 -> 500 us
26 				3 -> 1 ms
27 				4 -> 5 ms
28 				5 -> 10 ms
29 				6 -> 50 ms
30 				7 -> 100 ms
31 - st,fraction-z		: Length of the fractional part in z (recommended is 7)
32 			  (fraction-z ([0..7]) = Count of the fractional part)
33 - st,i-drive		: current limit value of the touchscreen drivers
34 				0 -> 20 mA (typical 35mA max)
35 				1 -> 50 mA (typical 80 mA max)
38  - st,sample-time	: ADC conversion time in number of clock.
39 				0 -> 36 clocks
40 				1 -> 44 clocks
41 				2 -> 56 clocks
42 				3 -> 64 clocks
43 				4 -> 80 clocks (recommended)
44 				5 -> 96 clocks
45 				6 -> 124 clocks
46  - st,mod-12b		: ADC Bit mode
47 				0 -> 10bit ADC
48 				1 -> 12bit ADC
49  - st,ref-sel		: ADC reference source
50 				0 -> internal
51 				1 -> external
52  - st,adc-freq		: ADC Clock speed
53 				0 -> 1.625 MHz
54 				1 -> 3.25 MHz
55 				2 || 3 -> 6.5 MHz
66 	pinctrl-names = "default";
67 	pinctrl-0 = <&pinctrl_touch_int>;
68 	#address-cells = <1>;
69 	#size-cells = <0>;
72 	interrupt-parent = <&gpio4>;
73 	interrupt-controller;
76 	irq-trigger = <0x1>;
79 	st,adc-freq = <1>;
80 	/* 12-bit ADC */
81 	st,mod-12b = <1>;
83 	st,ref-sel = <0>;
85 	st,sample-time = <4>;
88 		compatible = "st,stmpe-ts";
91 		st,ave-ctrl = <3>;
93 		st,touch-det-delay = <5>;
97 		st,fraction-z = <7>;
102 		st,i-drive = <1>;
105 		compatible = "st,stmpe-adc";
106 		st,norequest-mask = <0x0F>;