Lines Matching +full:1 +full:khz
26 maxItems: 1
29 maxItems: 1
32 const: 1
39 enum: [0, 1, 2, 3]
44 1: Low power (all sensing at a reduced reporting rate)
60 enum: [0, 1, 2, 3, 4, 5, 6, 7]
66 1: 13
84 enum: [0, 1, 2, 3, 4, 5, 6, 7]
85 default: 1
90 1: ULP channel
94 5: Generic channel 1
100 enum: [0, 1, 2, 3]
106 1: Proximity
196 enum: [0, 1, 2]
201 1: Floating
224 enum: [0, 1, 2, 3]
228 1: Semi-partial
265 enum: [0, 1, 2, 3]
271 1: 5 uA
279 enum: [0, 1, 2, 3]
283 0: 4 MHz (1 MHz)
284 1: 2 MHz (500 kHz)
285 2: 1 MHz (250 kHz)
286 3: 500 kHz (125 kHz)
294 Tightens the ATI band from 1/8 to 1/16 of the desired target (ULP and
303 enum: [0, 1, 2, 3]
311 enum: [0, 1, 2, 3]
319 enum: [0, 1, 2, 3]
327 enum: [0, 1, 2, 3]
335 minItems: 1
348 minItems: 1
361 enum: [0, 1, 2, 3, 4]
366 1: 0.5 pF
375 enum: [0, 1, 8, 9, 12, 14, 15]
379 1: Projected capacitance
391 enum: [0, 1, 2, 3]
398 1: 8 MHz (2 MHz)
399 2: 4 MHz (1 MHz)
400 3: 2 MHz (500 kHz)
423 minItems: 1
431 - generic-1
494 enum: [1, 5]
496 Specifies whether the event is to be interpreted as a key (1) or
534 enum: [0, 1]
539 1: Floating
558 enum: [0, 1, 2, 3]
563 1: Semi-partial
586 enum: [0, 1, 2, 3]
592 1: 5 uA
598 enum: [0, 1, 2, 3]
603 0: 4 MHz (1 MHz)
604 1: 2 MHz (500 kHz)
605 2: 1 MHz (250 kHz)
606 3: 500 kHz (125 kHz)
611 Tightens the ATI band from 1/8 to 1/16 of the desired target.
622 enum: [0, 1, 2, 3, 4, 5, 6, 7]
628 1: 4
638 enum: [0, 1, 2, 3]
644 enum: [0, 1, 2, 3]
651 enum: [0, 1, 2, 3]
657 minItems: 1
663 1: Negative flick or swipe in X direction
747 #address-cells = <1>;
751 #address-cells = <1>;
780 azoteq,filt-str-np-cnt = <1>;
781 azoteq,filt-str-lp-cnt = <1>;
788 azoteq,proj-bias = <1>;
808 channel-1 {
852 * by reset user interface (RUI) 1.