Lines Matching +full:channel +full:- +full:0

1 * Analog Devices AD5755 IIO Multi-Channel DAC Linux Driver
4  - compatible: Has to contain one of the following:
6 	adi,ad5755-1
11  - reg: spi chip select number for the device
12  - spi-cpha or spi-cpol: is the only modes that is supported
15  - spi-max-frequency: Definition as per
16 		Documentation/devicetree/bindings/spi/spi-bus.txt
19 See include/dt-bindings/iio/ad5755.h
20  - adi,ext-dc-dc-compenstation-resistor: boolean set if the hardware have an
23  - adi,dc-dc-phase:
25 	0: All dc-to-dc converters clock on the same edge.
26 	1: Channel A and Channel B clock on the same edge,
27 	   Channel C and Channel D clock on opposite edges.
28 	2: Channel A and Channel C clock on the same edge,
29 	   Channel B and Channel D clock on opposite edges.
30 	3: Channel A, Channel B, Channel C, and Channel D
32  - adi,dc-dc-freq-hz:
37  - adi,dc-dc-max-microvolt:
39 	the dc-to-dc converter is:
45 Optional for every channel:
46  - adi,mode:
48 	0: 0 V to 5 V voltage range.
49 	1: 0 V to 10 V voltage range.
53 	5: 0 mA to 20 mA current range.
54 	6: 0 mA to 24 mA current range.
55  - adi,ext-current-sense-resistor: boolean set if the hardware a external
57  - adi,enable-voltage-overrange: boolean enable voltage overrange
58  - adi,slew: Array of slewrate settings should contain 3 fields:
59 	1: Should be either 0 or 1 in order to enable or disable slewrate.
77 		0
90 dac@0 {
91 	#address-cells = <1>;
92 	#size-cells = <0>;
94 	reg = <0>;
95 	spi-max-frequency = <1000000>;
96 	spi-cpha;
97 	adi,dc-dc-phase = <0>;
98 	adi,dc-dc-freq-hz = <410000>;
99 	adi,dc-dc-max-microvolt = <23000000>;
100 	channel@0 {
101 		reg = <0>;
103 		adi,ext-current-sense-resistor;
104 		adi,slew = <0 64000 1>;
106 	channel@1 {
109 		adi,ext-current-sense-resistor;
110 		adi,slew = <0 64000 1>;
112 	channel@2 {
115 		adi,ext-current-sense-resistor;
116 		adi,slew = <0 64000 1>;
118 	channel@3 {
121 		adi,ext-current-sense-resistor;
122 		adi,slew = <0 64000 1>;