Lines Matching +full:ad7768 +full:- +full:1

1 Analog Devices AD7768-1 ADC device driver
3 Required properties for the AD7768-1:
5 - compatible: Must be "adi,ad7768-1"
6 - reg: SPI chip select number for the device
7 - spi-max-frequency: Max SPI frequency to use
8 	see: Documentation/devicetree/bindings/spi/spi-bus.txt
9 - clocks: phandle to the master clock (mclk)
10 	see: Documentation/devicetree/bindings/clock/clock-bindings.txt
11 - clock-names: Must be "mclk".
12 - interrupts: IRQ line for the ADC
13 	see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
14 - vref-supply: vref supply can be used as reference for conversion
15 - adi,sync-in-gpios: must be the device tree identifier of the SYNC-IN pin. Enables
23  - reset-gpios : GPIO spec for the RESET pin. If specified, it will be asserted during
29 		compatible = "adi,ad7768-1";
31 		spi-max-frequency = <2000000>;
32 		spi-cpol;
33 		spi-cpha;
34 		vref-supply = <&adc_vref>;
36 		interrupt-parent = <&gpio>;
37 		adi,sync-in-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
38 		reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
40 		clock-names = "mclk";