Lines Matching +full:low +full:- +full:latency

8  - compatible: 		should be set to "st,lis3lv02d-spi"
9  - reg:			the chipselect index
10  - spi-max-frequency:	maximal bus speed, should be set to 1000000 unless
12  - interrupts:		the interrupt generated by the device
15  - compatible:		should be set to "st,lis3lv02d"
16  - reg:			i2c slave address
17  - Vdd-supply:		The input supply for Vdd
18  - Vdd_IO-supply:	The input supply for Vdd_IO
23  - st,click-single-{x,y,z}:	if present, tells the device to issue an
26  - st,click-double-{x,y,z}:	if present, tells the device to issue an
29  - st,click-thresh-{x,y,z}:	set the x/y/z axis threshold
30  - st,click-click-time-limit:	click time limit, from 0 to 127.5msec
32  - st,click-latency:		click latency, from 0 to 255 msec with
34  - st,click-window:		click window, from 0 to 255 msec with
36  - st,irq{1,2}-disable:		disable IRQ 1/2
37  - st,irq{1,2}-ff-wu-1:		raise IRQ 1/2 on FF_WU_1 condition
38  - st,irq{1,2}-ff-wu-2:		raise IRQ 1/2 on FF_WU_2 condition
39  - st,irq{1,2}-data-ready:	raise IRQ 1/2 on data ready contition
40  - st,irq{1,2}-click:		raise IRQ 1/2 on click condition
41  - st,irq-open-drain:		consider IRQ lines open-drain
42  - st,irq-active-low:		make IRQ lines active low
43  - st,wu-duration-1:		duration register for Free-Fall/Wake-Up
45  - st,wu-duration-2:		duration register for Free-Fall/Wake-Up
47  - st,wakeup-{x,y,z}-{lo,hi}:	set wakeup condition on x/y/z axis for
49  - st,wakeup-threshold:		set wakeup threshold
50  - st,wakeup2-{x,y,z}-{lo,hi}:	set wakeup condition on x/y/z axis for
53  - st,wakeup2-threshold:	set wakeup threshold for second wakeup
55  - st,highpass-cutoff-hz=:	1, 2, 4 or 8 for 1Hz, 2Hz, 4Hz or 8Hz of
56 				highpass cut-off frequency
57  - st,hipass{1,2}-disable:	disable highpass 1/2.
58  - st,default-rate=:		set the default rate
59  - st,axis-{x,y,z}=:		set the axis to map to the three coordinates.
61  - st,{min,max}-limit-{x,y,z}	set the min/max limits for x/y/z axis
62 				(used by self-test)
68 		compatible = "st,lis302dl-spi";
70 		spi-max-frequency = <1000000>;
71 		interrupt-parent = <&gpio>;
74 		st,click-single-x;
75 		st,click-single-y;
76 		st,click-single-z;
77 		st,click-thresh-x = <10>;
78 		st,click-thresh-y = <10>;
79 		st,click-thresh-z = <10>;
80 		st,irq1-click;
81 		st,irq2-click;
82 		st,wakeup-x-lo;
83 		st,wakeup-x-hi;
84 		st,wakeup-y-lo;
85 		st,wakeup-y-hi;
86 		st,wakeup-z-lo;
87 		st,wakeup-z-hi;
95 		Vdd-supply = <&lis3_reg>;
96 		Vdd_IO-supply = <&lis3_reg>;
98 		st,click-single-x;
99 		st,click-single-y;
100 		st,click-single-z;
101 		st,click-thresh-x = <10>;
102 		st,click-thresh-y = <10>;
103 		st,click-thresh-z = <10>;
104 		st,irq1-click;
105 		st,irq2-click;
106 		st,wakeup-x-lo;
107 		st,wakeup-x-hi;
108 		st,wakeup-y-lo;
109 		st,wakeup-y-hi;
110 		st,wakeup-z-lo;
111 		st,wakeup-z-hi;
112 		st,min-limit-x = <120>;
113 		st,min-limit-y = <120>;
114 		st,min-limit-z = <140>;
115 		st,max-limit-x = <550>;
116 		st,max-limit-y = <550>;
117 		st,max-limit-z = <750>;