Lines Matching +full:level +full:- +full:triggered

4 - compatible : "nvidia,tegra<chip>-gpio"
5 - reg : Physical base address and length of the controller's registers.
6 - interrupts : The interrupt outputs from the controller. For Tegra20,
9 - #gpio-cells : Should be two. The first cell is the pin number and the
11   - bit 0 specifies polarity (0 for normal, 1 for inverted)
12 - gpio-controller : Marks the device node as a GPIO controller.
13 - #interrupt-cells : Should be 2.
16     bits[3:0] trigger type and level flags:
17       1 = low-to-high edge triggered.
18       2 = high-to-low edge triggered.
19       4 = active high level-sensitive.
20       8 = active low level-sensitive.
22 - interrupt-controller : Marks the device node as an interrupt controller.
27 	compatible = "nvidia,tegra20-gpio";
36 	#gpio-cells = <2>;
37 	gpio-controller;
38 	#interrupt-cells = <2>;
39 	interrupt-controller;