Lines Matching +full:at91rm9200 +full:- +full:gpio

1 * Atmel GPIO controller (PIO)
4 - compatible: "atmel,<chip>-gpio", where <chip> is at91rm9200 or at91sam9x5.
5 - reg: Should contain GPIO controller registers location and length
6 - interrupts: Should be the port interrupt shared by all the pins.
7 - #gpio-cells: Should be two.  The first cell is the pin number and
8   the second cell is used to specify optional parameters to declare if the GPIO
9   is active high or low. See gpio.txt.
10 - gpio-controller: Marks the device node as a GPIO controller.
11 - interrupt-controller: Marks the device node as an interrupt controller.
12 - #interrupt-cells: Should be two. The first cell is the pin number and the
14   in interrupt-controller/interrupts.txt for details.
17 - #gpio-lines: Number of gpio if absent 32.
21 	pioA: gpio@fffff200 {
22 		compatible = "atmel,at91rm9200-gpio";
25 		#gpio-cells = <2>;
26 		gpio-controller;
27 		#gpio-lines = <19>;
28 		interrupt-controller;
29 		#interrupt-cells = <2>;