Lines Matching +full:level +full:- +full:triggered

2 -------------------------------------------
5 - #gpio-cells 		: Should be two
6 			  - First cell is the GPIO line number
7 			  - Second cell is used to specify optional
9 - compatible		: Should be "xlnx,zynq-gpio-1.0" or
10 			  "xlnx,zynqmp-gpio-1.0" or "xlnx,versal-gpio-1.0
11 			  or "xlnx,pmc-gpio-1.0
12 - clocks		: Clock specifier (see clock bindings for details)
13 - gpio-controller	: Marks the device node as a GPIO controller.
14 - interrupts		: Interrupt specifier (see interrupt bindings for
16 - interrupt-controller	: Marks the device node as an interrupt controller.
17 - #interrupt-cells 	: Should be 2.  The first cell is the GPIO number.
18 			  The second cell bits[3:0] is used to specify trigger type and level flags:
19 			      1 = low-to-high edge triggered.
20 			      2 = high-to-low edge triggered.
21 			      4 = active high level-sensitive.
22 			      8 = active low level-sensitive.
23 - reg			: Address and length of the register set for the device
27 		#gpio-cells = <2>;
28 		compatible = "xlnx,zynq-gpio-1.0";
30 		gpio-controller;
31 		interrupt-parent = <&intc>;
33 		interrupt-controller;
34 		#interrupt-cells = <2>;