Lines Matching +full:hardware +full:- +full:driven

5 3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem
10 - compatible : Should be "lantiq,gpio-stp-xway"
11 - reg : Address and length of the register set for the device
12 - #gpio-cells : Should be two.  The first cell is the pin number and
15 - gpio-controller : Marks the device node as a gpio controller.
18 - lantiq,shadow : The default value that we shall assume as already set on the
20 - lantiq,groups : Set the 3 bit mask to select which of the 3 groups are enabled
22 - lantiq,dsl : The dsl core can control the 2 LSBs of the gpio cascade. This 2 bit
24 - lantiq,phy1 : The gphy1 core can control 3 bits of the gpio cascade.
25 - lantiq,phy2 : The gphy2 core can control 3 bits of the gpio cascade.
26 - lantiq,rising : use rising instead of falling edge for the shift register
31 	compatible = "lantiq,gpio-stp-xway";
33 	#gpio-cells = <2>;
34 	gpio-controller;