Lines Matching +full:level +full:- +full:triggered

4 - compatible:
5   - "ti,omap2-gpio" for OMAP2 controllers
6   - "ti,omap3-gpio" for OMAP3 controllers
7   - "ti,omap4-gpio" for OMAP4 controllers
8 - reg : Physical base address of the controller and length of memory mapped
10 - gpio-controller : Marks the device node as a GPIO controller.
11 - #gpio-cells : Should be two.
12   - first cell is the pin number
13   - second cell is used to specify optional parameters (unused)
14 - interrupt-controller: Mark the device node as an interrupt controller.
15 - #interrupt-cells : Should be 2.
18     bits[3:0] trigger type and level flags:
19       1 = low-to-high edge triggered.
20       2 = high-to-low edge triggered.
21       4 = active high level-sensitive.
22       8 = active low level-sensitive.
23 - interrupts : The interrupt the controller is rising as output when an
27 - ti,hwmods:		Name of the hwmod associated to the GPIO:
28 			"gpio<X>", <X> being the 1-based instance number
30 - ti,gpio-always-on: 	Indicates if a GPIO bank is always powered and
37     compatible = "ti,omap4-gpio";
40     gpio-controller;
41     #gpio-cells = <2>;
42     interrupt-controller;
43     #interrupt-cells = <2>;