Lines Matching +full:k3 +full:- +full:am654

4 - compatible: should be "ti,dm6441-gpio": for Davinci da850 SoCs
5 			"ti,keystone-gpio": for Keystone 2 66AK2H/K, 66AK2L,
7 			"ti,k2g-gpio", "ti,keystone-gpio": for 66AK2G
8 			"ti,am654-gpio", "ti,keystone-gpio": for TI K3 AM654
9 			"ti,j721e-gpio", "ti,keystone-gpio": for J721E SoCs
10 			"ti,am64-gpio", "ti,keystone-gpio": for AM64 SoCs
12 - reg: Physical base address of the controller and the size of memory mapped
15 - gpio-controller : Marks the device node as a gpio controller.
17 - #gpio-cells : Should be two.
18   - first cell is the pin number
19   - second cell is used to specify optional parameters (unused)
21 - interrupts: Array of GPIO interrupt number. Only banked or unbanked IRQs are
24 - ti,ngpio: The number of GPIO pins supported.
26 - ti,davinci-gpio-unbanked: The number of GPIOs that have an individual interrupt
29 - clocks: Should contain the device's input clock, and should be defined as per
32           Documentation/devicetree/bindings/clock/keystone-gate.txt
35           Documentation/devicetree/bindings/clock/ti,sci-clk.txt
38 - clock-names: Name should be "gpio";
40 Currently clock-names and clocks are needed for all keystone 2 platforms
45 interrupt-controller/interrupts.txt.
50 	compatible = "ti,dm6441-gpio";
51 	gpio-controller;
52 	#gpio-cells = <2>;
54 	interrupt-parent = <&intc>;
61 	ti,davinci-gpio-unbanked = <0>;
62 	interrupt-controller;
63 	#interrupt-cells = <2>;
67 	compatible = "gpio-leds";
85 	compatible = "ti,k2g-gpio", "ti,keystone-gpio";
87 	gpio-controller;
88 	#gpio-cells = <2>;
98 	interrupt-controller;
99 	#interrupt-cells = <2>;
101 	ti,davinci-gpio-unbanked = <0>;
103 	clock-names = "gpio";
109 	compatible = "ti,keystone-gpio";
111 	gpio-controller;
112 	#gpio-cells = <2>;
147 	clock-names = "gpio";
149 	ti,davinci-gpio-unbanked = <32>;
152 Example for K3 AM654:
155 	compatible = "ti,am654-gpio", "ti,keystone-gpio";
157 	gpio-controller;
158 	#gpio-cells = <2>;
159 	interrupt-parent = <&intr_wkup_gpio>;
161 	interrupt-controller;
162 	#interrupt-cells = <2>;
164 	ti,davinci-gpio-unbanked = <0>;
166 	clock-names = "gpio";