Lines Matching +full:usb +full:- +full:uart +full:- +full:tx

4 - compatible: "stericsson,dma40"
5 - reg: Address range of the DMAC registers
6 - reg-names: Names of the above areas to use during resource look-up
7 - interrupt: Should contain the DMAC interrupt number
8 - #dma-cells: must be <3>
9 - memcpy-channels: Channels to be used for memcpy
12 - dma-channels: Number of channels supported by hardware - if not present
14 - disabled-channels: Channels which can not be used
18 	dma: dma-controller@801c0000 {
19 		compatible = "stericsson,db8500-dma40", "stericsson,dma40";
21 		reg-names = "base", "lcpa";
22 		interrupt-parent = <&intc>;
25 		#dma-cells = <2>;
26 		memcpy-channels  = <56 57 58 59 60>;
27 		disabled-channels  = <12>;
28 		dma-channels = <8>;
33 - dmas: Comma separated list of dma channel requests
34 - dma-names: Names of the aforementioned requested channels
60 bidirectional, i.e. the same for RX and TX operations:
72 10: Multi-Channel Display Engine MCDE RX
73 11: UART port 2
74 12: UART port 1
75 13: UART port 0
78 16: USB OTG in/out endpoints 7 & 15
79 17: USB OTG in/out endpoints 6 & 14
80 18: USB OTG in/out endpoints 5 & 13
81 19: USB OTG in/out endpoints 4 & 12
98 36: USB OTG in/out endpoints 3 & 11
99 37: USB OTG in/out endpoints 2 & 10
100 38: USB OTG in/out endpoints 1 & 9
101 39: USB OTG in/out endpoints 8
111 49: Crypto Accelerator 1 TX or Hash Accelerator 1 TX
112 50: Hash Accelerator 1 TX
113 51: memcpy TX (to be used by the DMA driver for memcpy operations)
124 62: Crypto Accelerator 0 TX or Hash Accelerator 0 TX
125 63: Hash Accelerator 0 TX
129 	uart@80120000 {
134 		dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
135 		       <&dma 13 0 0x0>; /* Logical - MemToDev */
136 		dma-names = "rx", "rx";