Lines Matching +full:usb +full:- +full:controller

1 * DMA40 DMA Controller
4 - compatible: "stericsson,dma40"
5 - reg: Address range of the DMAC registers
6 - reg-names: Names of the above areas to use during resource look-up
7 - interrupt: Should contain the DMAC interrupt number
8 - #dma-cells: must be <3>
9 - memcpy-channels: Channels to be used for memcpy
12 - dma-channels: Number of channels supported by hardware - if not present
14 - disabled-channels: Channels which can not be used
18 	dma: dma-controller@801c0000 {
19 		compatible = "stericsson,db8500-dma40", "stericsson,dma40";
21 		reg-names = "base", "lcpa";
22 		interrupt-parent = <&intc>;
25 		#dma-cells = <2>;
26 		memcpy-channels  = <56 57 58 59 60>;
27 		disabled-channels  = <12>;
28 		dma-channels = <8>;
33 - dmas: Comma separated list of dma channel requests
34 - dma-names: Names of the aforementioned requested channels
37   1. A phandle pointing to the DMA controller
62 0:  SPI controller 0
63 1:  SD/MMC controller 0 (unused)
64 2:  SD/MMC controller 1 (unused)
65 3:  SD/MMC controller 2 (unused)
72 10: Multi-Channel Display Engine MCDE RX
78 16: USB OTG in/out endpoints 7 & 15
79 17: USB OTG in/out endpoints 6 & 14
80 18: USB OTG in/out endpoints 5 & 13
81 19: USB OTG in/out endpoints 4 & 12
90 28: SD/MM controller 2
91 29: SD/MM controller 0
94 32: SD/MM controller 1
95 33: SPI controller 2
97 35: SPI controller 1
98 36: USB OTG in/out endpoints 3 & 11
99 37: USB OTG in/out endpoints 2 & 10
100 38: USB OTG in/out endpoints 1 & 9
101 39: USB OTG in/out endpoints 8
102 40: SPI controller 3
103 41: SD/MM controller 3
104 42: SD/MM controller 4
105 43: SD/MM controller 5
134 		dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
135 		       <&dma 13 0 0x0>; /* Logical - MemToDev */
136 		dma-names = "rx", "rx";