Lines Matching +full:channel +full:- +full:4

4 - compatible: "stericsson,dma40"
5 - reg: Address range of the DMAC registers
6 - reg-names: Names of the above areas to use during resource look-up
7 - interrupt: Should contain the DMAC interrupt number
8 - #dma-cells: must be <3>
9 - memcpy-channels: Channels to be used for memcpy
12 - dma-channels: Number of channels supported by hardware - if not present
14 - disabled-channels: Channels which can not be used
18 	dma: dma-controller@801c0000 {
19 		compatible = "stericsson,db8500-dma40", "stericsson,dma40";
21 		reg-names = "base", "lcpa";
22 		interrupt-parent = <&intc>;
25 		#dma-cells = <2>;
26 		memcpy-channels  = <56 57 58 59 60>;
27 		disabled-channels  = <12>;
28 		dma-channels = <8>;
33 - dmas: Comma separated list of dma channel requests
34 - dma-names: Names of the aforementioned requested channels
36 Each dmas request consists of 4 cells:
40   3. The DMA request line number (only when 'use fixed channel' is set)
41   4. A 32bit mask specifying; mode, direction and endianness
44                 Logical channel when unset
45                 Physical channel when set
52         0x00000008: Use fixed channel:
53                 Use automatic channel selection when unset
55         0x00000010: Set channel as high priority:
66 4:  I2C port 1
69 7:  I2C port 4
72 10: Multi-Channel Display Engine MCDE RX
81 19: USB OTG in/out endpoints 4 & 12
82 20: SLIMbus or HSI channel 0
83 21: SLIMbus or HSI channel 1
84 22: SLIMbus or HSI channel 2
85 23: SLIMbus or HSI channel 3
93 31: MSP port 0 or SLIMbus channel 0
104 42: SD/MM controller 4
108 46: SLIMbus channel 8 or Multimedia DSP SXA6
109 47: SLIMbus channel 9 or Multimedia DSP SXA7
114 52: SLIMbus or HSI channel 4
115 53: SLIMbus or HSI channel 5
116 54: SLIMbus or HSI channel 6
117 55: SLIMbus or HSI channel 7
134 		dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
135 		       <&dma 13 0 0x0>; /* Logical - MemToDev */
136 		dma-names = "rx", "rx";