Lines Matching +full:rx +full:- +full:crci
4 - compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
5 - reg: Address range for DMA registers
6 - interrupts: Should contain one interrupt shared by all channels
7 - #dma-cells: must be <2>. First cell denotes the channel number. Second cell
8 denotes CRCI (client rate control interface) flow control assignment.
9 - clocks: Should contain the core clock and interface clock.
10 - clock-names: Must contain "core" for the core clock and "iface" for the
12 - resets: Must contain an entry for each entry in reset names.
13 - reset-names: Must include the following entries:
14 - clk
15 - c0
16 - c1
17 - c2
18 - qcom,ee: indicates the security domain identifier used in the secure world.
25 #dma-cells = <2>;
28 clock-names = "core", "iface";
34 reset-names = "clk", "c0", "c1", "c2";
44 3. CRCI assignment, if applicable. If no CRCI flow control is required, use 0.
45 The CRCI is used for flow control. It identifies the peripheral device that
51 spi-max-frequency = <50000000>;
53 pinctrl-0 = <&spi_pins>;
54 pinctrl-names = "default";
56 cs-gpios = <&qcom_pinmux 20 0>;
60 dma-names = "rx", "tx";