Lines Matching +full:level +full:- +full:shifter

5 -------------------
25 -----------
36 -------
39 name for each display. If no aliases are defined, a semi-random number is used
43 -------
45 A shortened example of the DSS description for OMAP4, with non-relevant parts
49 	compatible = "ti,omap4-dss";
54 	clock-names = "fck";
55 	#address-cells = <1>;
56 	#size-cells = <1>;
60 		compatible = "ti,omap4-dispc";
65 		clock-names = "fck";
69 		compatible = "ti,omap4-hdmi";
74 		reg-names = "wp", "pll", "phy", "core";
79 		clock-names = "fck", "sys_clk";
84 omap4-panda.dts.
87 chip (MIPI DPI to DVI encoder) and a TPD12S015 chip (HDMI ESD protection & level
88 shifter). The video pipelines for the connectors are formed as follows:
90 DSS Core --(MIPI DPI)--> TFP410 --(DVI)--> DVI Connector
91 OMAP HDMI --(HDMI)--> TPD12S015 --(HDMI)--> HDMI Connector
101 		gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;	/* 0, power-down */
103 		pinctrl-names = "default";
104 		pinctrl-0 = <&tfp410_pins>;
107 			#address-cells = <1>;
108 			#size-cells = <0>;
114 					remote-endpoint = <&dpi_out>;
122 					remote-endpoint = <&dvi_connector_in>;
129 		compatible = "dvi-connector";
132 		i2c-bus = <&i2c3>;
136 				remote-endpoint = <&tfp410_out>;
144 		pinctrl-names = "default";
145 		pinctrl-0 = <&tpd12s015_pins>;
152 			#address-cells = <1>;
153 			#size-cells = <0>;
159 					remote-endpoint = <&hdmi_out>;
167 					remote-endpoint = <&hdmi_connector_in>;
174 		compatible = "hdmi-connector";
179 				remote-endpoint = <&tpd12s015_out>;
188 	pinctrl-names = "default";
189 	pinctrl-0 = <&dss_dpi_pins>;
193 			remote-endpoint = <&tfp410_in>;
194 			data-lines = <24>;
201 	vdda-supply = <&vdac>;
203 	pinctrl-names = "default";
204 	pinctrl-0 = <&dss_hdmi_pins>;
208 			remote-endpoint = <&tpd12s015_in>;