Lines Matching full:for
6 For pre-Tegra186, one entry describing the whole register area.
7 For Tegra186, one entry for each entry in reg-names:
16 - clocks: Must contain one entry, for the module clock.
17 See ../clocks/clock-bindings.txt for details.
18 - resets: Must contain an entry for each entry in reset-names.
19 See ../reset/reset.txt for details.
25 - operating-points-v2: See ../bindings/opp/opp.txt for details.
28 For each opp entry in 'operating-points-v2' table of host1x and its modules:
49 - clocks: Must contain one entry, for the module clock.
50 See ../clocks/clock-bindings.txt for details.
51 - resets: Must contain an entry for each entry in reset-names.
52 See ../reset/reset.txt for details.
57 - interconnects: Must contain entry for the MPE memory clients.
58 - interconnect-names: Must include name of the interconnect path for each
59 interconnect entry. Consult TRM documentation for information about
61 - operating-points-v2: See ../bindings/opp/opp.txt for details.
70 - clocks: clocks: Must contain one entry, for the module clock.
71 See ../clocks/clock-bindings.txt for details.
73 - resets: Must contain an entry for each entry in reset-names.
74 See ../reset/reset.txt for details.
97 See ../clocks/clock-bindings.txt for details.
142 - interconnects: Must contain entry for the VI memory clients.
143 - interconnect-names: Must include name of the interconnect path for each
144 interconnect entry. Consult TRM documentation for information about
146 - operating-points-v2: See ../bindings/opp/opp.txt for details.
155 - clocks: Must contain one entry, for the module clock.
156 See ../clocks/clock-bindings.txt for details.
157 - resets: Must contain an entry for each entry in reset-names.
158 See ../reset/reset.txt for details.
163 - interconnects: Must contain entry for the EPP memory clients.
164 - interconnect-names: Must include name of the interconnect path for each
165 interconnect entry. Consult TRM documentation for information about
167 - operating-points-v2: See ../bindings/opp/opp.txt for details.
176 - clocks: Must contain one entry, for the module clock.
177 See ../clocks/clock-bindings.txt for details.
178 - resets: Must contain an entry for each entry in reset-names.
179 See ../reset/reset.txt for details.
184 - interconnects: Must contain entry for the ISP memory clients.
185 - interconnect-names: Must include name of the interconnect path for each
186 interconnect entry. Consult TRM documentation for information about
196 - clocks: Must contain one entry, for the module clock.
197 See ../clocks/clock-bindings.txt for details.
198 - resets: Must contain an entry for each entry in reset-names.
199 See ../reset/reset.txt for details.
205 - interconnects: Must contain entry for the GR2D memory clients.
206 - interconnect-names: Must include name of the interconnect path for each
207 interconnect entry. Consult TRM documentation for information about
209 - operating-points-v2: See ../bindings/opp/opp.txt for details.
217 - clocks: Must contain an entry for each entry in clock-names.
218 See ../clocks/clock-bindings.txt for details.
224 - resets: Must contain an entry for each entry in reset-names.
225 See ../reset/reset.txt for details.
233 - interconnects: Must contain entry for the GR3D memory clients.
234 - interconnect-names: Must include name of the interconnect path for each
235 interconnect entry. Consult TRM documentation for information about
237 - operating-points-v2: See ../bindings/opp/opp.txt for details.
246 - clocks: Must contain an entry for each entry in clock-names.
247 See ../clocks/clock-bindings.txt for details.
252 - resets: Must contain an entry for each entry in reset-names.
253 See ../reset/reset.txt for details.
263 - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
264 - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
267 - interconnects: Must contain entry for the DC memory clients.
268 - interconnect-names: Must include name of the interconnect path for each
269 interconnect entry. Consult TRM documentation for information about
271 - operating-points-v2: See ../bindings/opp/opp.txt for details.
280 - hdmi-supply: supply for the +5V HDMI connector pin
281 - vdd-supply: regulator for supply voltage
282 - pll-supply: regulator for PLL
283 - clocks: Must contain an entry for each entry in clock-names.
284 See ../clocks/clock-bindings.txt for details.
289 - resets: Must contain an entry for each entry in reset-names.
290 See ../reset/reset.txt for details.
295 - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
296 - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
299 - operating-points-v2: See ../bindings/opp/opp.txt for details.
307 - clocks: Must contain one entry, for the module clock.
308 See ../clocks/clock-bindings.txt for details.
311 - operating-points-v2: See ../bindings/opp/opp.txt for details.
319 - clocks: Must contain an entry for each entry in clock-names.
320 See ../clocks/clock-bindings.txt for details.
326 - resets: Must contain an entry for each entry in reset-names.
327 See ../reset/reset.txt for details.
336 - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
337 - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
342 - operating-points-v2: See ../bindings/opp/opp.txt for details.
348 - "nvidia,tegra124-sor": for Tegra124 and Tegra132
349 - "nvidia,tegra132-sor": for Tegra132
350 - "nvidia,tegra210-sor": for Tegra210
351 - "nvidia,tegra210-sor1": for Tegra210
352 - "nvidia,tegra186-sor": for Tegra186
353 - "nvidia,tegra186-sor1": for Tegra186
356 - clocks: Must contain an entry for each entry in clock-names.
357 See ../clocks/clock-bindings.txt for details.
359 - sor: clock input for the SOR hardware
361 - parent: input for the pixel clock
362 - dp: reference clock for the SOR clock
363 - safe: safe reference for the SOR clock during power up
365 For Tegra186 and later:
369 - source: source clock for the SOR clock (obsolete, use "out" instead)
371 - resets: Must contain an entry for each entry in reset-names.
372 See ../reset/reset.txt for details.
380 - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
381 - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
393 - "nvidia,tegra124-dpaux": for Tegra124 and Tegra132
394 - "nvidia,tegra210-dpaux": for Tegra210
397 - clocks: Must contain an entry for each entry in clock-names.
398 See ../clocks/clock-bindings.txt for details.
400 - dpaux: clock input for the DPAUX hardware
402 - resets: Must contain an entry for each entry in reset-names.
403 See ../reset/reset.txt for details.
409 node should be added. See ../../i2c/i2c.txt for more information.
411 See ../pinctrl/nvidia,tegra124-dpaux-padctl.txt for information
418 - clocks: Must contain an entry for each entry in clock-names.
419 See ../clocks/clock-bindings.txt for details.
421 - vic: clock input for the VIC hardware
422 - resets: Must contain an entry for each entry in reset-names.
423 See ../reset/reset.txt for details.
428 - interconnects: Must contain entry for the VIC memory clients.
429 - interconnect-names: Must include name of the interconnect path for each
430 interconnect entry. Consult TRM documentation for information about