Lines Matching full:panel

4 $id: http://devicetree.org/schemas/display/panel/panel-edp.yaml#
13   This binding file can be used to indicate that an eDP panel is connected
15   actually specifying exactly what panel is connected. This is useful for
16   the case that more than one different panel could be connected to the
20   As per above, a requirement for using this binding is that the panel is
23   the panel. We can use this to identify display size, resolution, and
32   the operating system will lookup the panel in a table (based on EDID
37   vast majority of panel datasheets have a power sequence diagram that
38   looks the exactly the same as every other panel. Each panel datasheet
81   The above looks fairly complex but, as per above, each panel only cares
85   - $ref: panel-common.yaml#
89     const: edp-panel
94       panel's power-supply before the HPD signal is a reliable way to know
101       The panel specifies that HPD will be asserted this many milliseconds
108       needed if HPD hooked up, either through a GPIO in the panel node or
173           panel {
174             compatible = "edp-panel";