Lines Matching +full:lpddr3 +full:- +full:timings
1 * LPDDR3 SDRAM memories compliant to JEDEC JESD209-3C
4 - compatible : Should be "<vendor>,<type>", and generic value "jedec,lpddr3".
8 - density : <u32> representing density in Mb (Mega bits)
9 - io-width : <u32> representing bus width. Possible values are 8, 16, 32, 64
10 - #address-cells: Must be set to 1
11 - #size-cells: Must be set to 0
15 - manufacturer-id : <u32> Manufacturer ID value read from Mode Register 5
16 - revision-id : <u32 u32> Revision IDs read from Mode Registers 6 and 7
20 These values shall be obtained from the device data-sheet.
21 - tRFC-min-tck
22 - tRRD-min-tck
23 - tRPab-min-tck
24 - tRPpb-min-tck
25 - tRCD-min-tck
26 - tRC-min-tck
27 - tRAS-min-tck
28 - tWTR-min-tck
29 - tWR-min-tck
30 - tRTP-min-tck
31 - tW2W-C2C-min-tck
32 - tR2R-C2C-min-tck
33 - tWL-min-tck
34 - tDQSCK-min-tck
35 - tRL-min-tck
36 - tFAW-min-tck
37 - tXSR-min-tck
38 - tXP-min-tck
39 - tCKE-min-tck
40 - tCKESR-min-tck
41 - tMRD-min-tck
44 - The lpddr3 node may have one or more child nodes of type "lpddr3-timings".
45 "lpddr3-timings" provides AC timing parameters of the device for
46 a given speed-bin. Please see Documentation/devicetree/
47 bindings/ddr/lpddr3-timings.txt for more information on "lpddr3-timings"
51 samsung_K3QF2F20DB: lpddr3 {
52 compatible = "samsung,K3QF2F20DB", "jedec,lpddr3";
54 io-width = <32>;
55 manufacturer-id = <1>;
56 revision-id = <123 234>;
57 #address-cells = <1>;
58 #size-cells = <0>;
60 tRFC-min-tck = <17>;
61 tRRD-min-tck = <2>;
62 tRPab-min-tck = <2>;
63 tRPpb-min-tck = <2>;
64 tRCD-min-tck = <3>;
65 tRC-min-tck = <6>;
66 tRAS-min-tck = <5>;
67 tWTR-min-tck = <2>;
68 tWR-min-tck = <7>;
69 tRTP-min-tck = <2>;
70 tW2W-C2C-min-tck = <0>;
71 tR2R-C2C-min-tck = <0>;
72 tWL-min-tck = <8>;
73 tDQSCK-min-tck = <5>;
74 tRL-min-tck = <14>;
75 tFAW-min-tck = <5>;
76 tXSR-min-tck = <12>;
77 tXP-min-tck = <2>;
78 tCKE-min-tck = <2>;
79 tCKESR-min-tck = <2>;
80 tMRD-min-tck = <5>;
82 timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
83 compatible = "jedec,lpddr3-timings";
84 /* workaround: 'reg' shows max-freq */
86 min-freq = <100000000>;
97 tW2W-C2C = <0>;
98 tR2R-C2C = <0>;