Lines Matching +full:3 +full:- +full:cell
1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/clock/stericsson,u8500-clks.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: ST-Ericsson DB8500 (U8500) clocks
10 - Ulf Hansson <ulf.hansson@linaro.org>
11 - Linus Walleij <linus.walleij@linaro.org>
14 DB8500 digital baseband system-on-chip and its siblings such as
16 itself, not off-chip clocks. There are four different on-chip
17 clocks - RTC (32 kHz), CPU clock (SMP TWD), PRCMU (power reset and
25 - stericsson,u8500-clks
26 - stericsson,u8540-clks
27 - stericsson,u9540-clks
31 - description: PRCC 1 register area
32 - description: PRCC 2 register area
33 - description: PRCC 3 register area
34 - description: PRCC 5 register area
35 - description: PRCC 6 register area
37 prcmu-clock:
38 description: A subnode with one clock cell for PRCMU (power, reset, control
39 management unit) clocks. The cell indicates which PRCMU clock in the
40 prcmu-clock node the consumer wants to use.
44 '#clock-cells':
49 prcc-periph-clock:
51 reset and clock controller) peripheral clocks. The first cell indicates
52 which PRCC block the consumer wants to use, possible values are 1, 2, 3,
53 5, 6. The second cell indicates which clock inside the PRCC block it
58 '#clock-cells':
63 prcc-kernel-clock:
65 and clock controller) kernel clocks. The first cell indicates which PRCC
66 block the consumer wants to use, possible values are 1, 2, 3, 5, 6. The
67 second cell indicates which clock inside the PRCC block it wants, possible
72 '#clock-cells':
77 prcc-reset-controller:
79 PRCC (peripheral reset and clock controller). The first cell indicates
80 which PRCC block the consumer wants to use, possible values are 1, 2, 3
81 5 and 6. The second cell indicates which reset line inside the PRCC block
86 '#reset-cells':
91 rtc32k-clock:
96 '#clock-cells':
101 smp-twd-clock:
107 '#clock-cells':
112 clkout-clock:
114 output clocks. These are two PRCMU-internal clocks that can be divided and
119 '#clock-cells':
121 The first cell indicates which output clock we are using,
123 The second cell indicates which clock we want to use as source,
126 The third cell is a divider, legal values are 1 thru 63.
127 const: 3
132 - compatible
133 - reg
134 - prcmu-clock
135 - prcc-periph-clock
136 - prcc-kernel-clock
137 - rtc32k-clock
138 - smp-twd-clock
143 - |
144 #include <dt-bindings/clock/ste-db8500-clkout.h>
146 compatible = "stericsson,u8500-clks";
151 prcmu_clk: prcmu-clock {
152 #clock-cells = <1>;
155 prcc_pclk: prcc-periph-clock {
156 #clock-cells = <2>;
159 prcc_kclk: prcc-kernel-clock {
160 #clock-cells = <2>;
163 prcc_reset: prcc-reset-controller {
164 #reset-cells = <2>;
167 rtc_clk: rtc32k-clock {
168 #clock-cells = <0>;
171 smp_twd_clk: smp-twd-clock {
172 #clock-cells = <0>;
175 clkout_clk: clkout-clock {
176 #clock-cells = <3>;