Lines Matching +full:rclk +full:-

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
5 $id: http://devicetree.org/schemas/clock/baikal,bt1-ccu-pll.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 title: Baikal-T1 Clock Control Unit PLL
11   - Serge Semin <fancer.lancer@gmail.com>
14   Clocks Control Unit is the core of Baikal-T1 SoC System Controller
18   IP-blocks or to groups of blocks (clock domains). The transformation is done
19   by means of PLLs and gateable/non-gateable dividers embedded into the CCU.
23   2) PLLs clocks generators (PLLs) - described in this binding file.
24   3) AXI-bus clock dividers (AXI).
28           +---------------+
29           | Baikal-T1 CCU |
30           |   +----+------|- MIPS P5600 cores
31           | +-|PLLs|------|- DDR controller
32           | | +----+      |
33   +----+  | |  |  |       |
34   |XTAL|--|-+  |  | +---+-|
35   +----+  | |  |  +-|AXI|-|- AXI-bus
36           | |  |    +---+-|
38           | |  +----+---+-|- APB-bus
39           | +-------|SYS|-|- Low-speed Devices
40           |         +---+-|- High-speed Devices
41           +---------------+
43   Each CCU sub-block is represented as a separate dts-node and has an
56       +--------------------------+
58       +-->+---+    +---+   +---+ |  +---+   0|\
59   CLKF--->|/NF|--->|PFD|...|VCO|-+->|/OD|--->| |
60           +---+ +->+---+   +---+ /->+---+    | |--->CLKOUT
61   CLKOD---------C----------------+          1| |
62        +--------C--------------------------->|/
64   Rclk-+->+---+ |                             |
65   CLKR--->|/NR|-+                             |
66           +---+                               |
67   BYPASS--------------------------------------+
68   BWADJ--->
70   where Rclk is the reference clock coming  from XTAL, NR - reference clock
71   divider, NF - PLL clock multiplier, OD - VCO output clock divider, CLKOUT -
81   The CCU PLL dts-node uses the common clock bindings with no custom
83   'include/dt-bindings/clock/bt1-ccu.h'. Since CCU PLL is a part of the
84   Baikal-T1 SoC System Controller its DT node is supposed to be a child of
89     const: baikal,bt1-ccu-pll
94   "#clock-cells":
101   clock-names:
107   - compatible
108   - "#clock-cells"
109   - clocks
110   - clock-names
114   - |
115     clock-controller@1f04d000 {
116       compatible = "baikal,bt1-ccu-pll";
118       #clock-cells = <1>;
121       clock-names = "ref_clk";
124   - |
125     clk25m: clock-oscillator-25m {
126       compatible = "fixed-clock";
127       #clock-cells = <0>;
128       clock-frequency = <25000000>;
129       clock-output-names = "clk25m";