Lines Matching +full:two +full:- +full:wires

4 without wires. It simply means that this module was originally designed for
5 wireless and mobile applications that use low-power technology.
11  - compatible:		Should contain one of the following:
12 			  "fsl,imx1-weim"
13 			  "fsl,imx27-weim"
14 			  "fsl,imx51-weim"
15 			  "fsl,imx50-weim"
16 			  "fsl,imx6q-weim"
17  - reg:			A resource specifier for the register space
19  - clocks:		the clock, see the example below.
20  - #address-cells:	Must be set to 2 to allow memory address translation
21  - #size-cells:		Must be set to 1 to allow CS address passing
22  - ranges:		Must be set up to reflect the memory layout with four
23 			integer values for each chip-select line in use:
25 			   <cs-number> 0 <physical address of mapping> <size>
29  - fsl,weim-cs-gpr:	For "fsl,imx50-weim" and "fsl,imx6q-weim" type of
37 			---------------------------------------------
47  - fsl,burst-clk-enable	For "fsl,imx50-weim" and "fsl,imx6q-weim" type of
51  - fsl,continuous-burst-clk	Make Burst Clock to output continuous clock.
54 			"fsl,burst-clk-enable" is set.
58  - fsl,weim-cs-timing:	The timing array, contains timing values for the
62 			For i.MX1, i.MX21 ("fsl,imx1-weim") there are two
64 			For i.MX25, i.MX27, i.MX31 and i.MX35 ("fsl,imx27-weim")
66 			For i.MX50, i.MX53 ("fsl,imx50-weim"),
67 			i.MX51 ("fsl,imx51-weim") and i.MX6Q ("fsl,imx6q-weim")
71 Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM:
74 		compatible = "fsl,imx6q-weim";
77 		#address-cells = <2>;
78 		#size-cells = <1>;
80 		fsl,weim-cs-gpr = <&gpr>;
83 			compatible = "cfi-flash";
85 			#address-cells = <1>;
86 			#size-cells = <1>;
87 			bank-width = <2>;
88 			fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
93 Example for an imx6q-based board, a multi-chipselect device connected to WEIM:
99 		compatible = "fsl,imx6q-weim";
102 		#address-cells = <2>;
103 		#size-cells = <1>;
108 		fsl,weim-cs-gpr = <&gpr>;
114 			fsl,weim-cs-timing = <0x024400b1 0x00001010 0x20081100