Lines Matching +full:ahci +full:- +full:compatible
1 * Qualcomm AHCI SATA Controller
3 SATA nodes are defined to describe on-chip Serial ATA controllers.
7 - compatible : compatible list, must contain "generic-ahci"
8 - interrupts : <interrupt mapping for SATA IRQ>
9 - reg : <registers mapping>
10 - phys : Must contain exactly one entry as specified
11 in phy-bindings.txt
12 - phy-names : Must be "sata-phy"
14 Required properties for "qcom,ipq806x-ahci" compatible:
15 - clocks : Must contain an entry for each entry in clock-names.
16 - clock-names : Shall be:
17 "slave_iface" - Fabric port AHB clock for SATA
18 "iface" - AHB clock
19 "core" - core clock
20 "rxoob" - RX out-of-band clock
21 "pmalive" - Power Module Alive clock
22 - assigned-clocks : Shall be:
25 - assigned-clock-rates : Shall be:
31 compatible = "qcom,ipq806x-ahci", "generic-ahci";
41 clock-names = "slave_iface", "iface", "core",
43 assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
44 assigned-clock-rates = <100000000>, <100000000>;
47 phy-names = "sata-phy";