Lines Matching +full:tegra210 +full:- +full:xusb
4 - compatible : Must be one of:
5 - Tegra124 : "nvidia,tegra124-ahci"
6 - Tegra132 : "nvidia,tegra132-ahci", "nvidia,tegra124-ahci"
7 - Tegra210 : "nvidia,tegra210-ahci"
8 - reg : Should contain 2 entries:
9 - AHCI register set (SATA BAR5)
10 - SATA register set
11 - interrupts : Defines the interrupt used by SATA
12 - clocks : Must contain an entry for each entry in clock-names.
13 See ../clocks/clock-bindings.txt for details.
14 - clock-names : Must include the following entries:
15 - sata
16 - sata-oob
17 - resets : Must contain an entry for each entry in reset-names.
19 - reset-names : Must include the following entries:
20 - sata
21 - sata-oob
22 - sata-cold
23 - phys : Must contain an entry for each entry in phy-names.
24 See ../phy/phy-bindings.txt for details.
25 - phy-names : Must include the following entries:
26 - For Tegra124 and Tegra132:
27 - sata-phy : XUSB PADCTL SATA PHY
28 - For Tegra124 and Tegra132:
29 - hvdd-supply : Defines the SATA HVDD regulator
30 - vddio-supply : Defines the SATA VDDIO regulator
31 - avdd-supply : Defines the SATA AVDD regulator
32 - target-5v-supply : Defines the SATA 5V power regulator
33 - target-12v-supply : Defines the SATA 12V power regulator
36 - reg :
37 - AUX register set
38 - clock-names :
39 - cml1 :
42 - phy-names :
43 - For T210:
44 - sata-phy