Lines Matching +full:phy +full:- +full:sata3

1 * APM X-Gene 6.0 Gb/s SATA host controller nodes
3 SATA host controller nodes are defined to describe on-chip Serial ATA
7 - compatible		: Shall contain:
8   * "apm,xgene-ahci"
9 - reg			: First memory resource shall be the AHCI memory
19 - interrupts		: Interrupt-specifier for SATA host controller IRQ.
20 - clocks		: Reference to the clock entry.
21 - phys			: A list of phandles + phy-specifiers, one for each
22 			  entry in phy-names.
23 - phy-names		: Should contain:
24   * "sata-phy" for the SATA 6.0Gbps PHY
27 - dma-coherent		: Present if dma operations are coherent
28 - status		: Shall be "ok" if enabled or "disabled" if disabled.
33 			compatible = "fixed-clock";
34 			#clock-cells = <1>;
35 			clock-frequency = <100000000>;
36 			clock-output-names = "sataclk";
39 		phy2: phy@1f22a000 {
40 			compatible = "apm,xgene-phy";
42 			#phy-cells = <1>;
45 		phy3: phy@1f23a000 {
46 			compatible = "apm,xgene-phy";
48 			#phy-cells = <1>;
52 			compatible = "apm,xgene-ahci";
59 			dma-coherent;
62 			phy-names = "sata-phy";
65 		sata3: sata@1a800000 {
66 			compatible = "apm,xgene-ahci-pcie";
73 			dma-coherent;
76 			phy-names = "sata-phy";