Lines Matching +full:ahci +full:- +full:port

4  - compatible	   : Must be "mediatek,<chip>-ahci", "mediatek,mtk-ahci".
5 		     When using "mediatek,mtk-ahci" compatible strings, you
7 		     - "mediatek,mt7622-ahci"
8  - reg		   : Physical base addresses and length of register sets.
9  - interrupts	   : Interrupt associated with the SATA device.
10  - interrupt-names : Associated name must be: "hostc".
11  - clocks	   : A list of phandle and clock specifier pairs, one for each
12 		     entry in clock-names.
13  - clock-names	   : Associated names must be: "ahb", "axi", "asic", "rbc", "pm".
14  - phys		   : A phandle and PHY specifier pair for the PHY port.
15  - phy-names	   : Associated name must be: "sata-phy".
16  - ports-implemented : See ./ahci-platform.txt for details.
19  - power-domains   : A phandle and power domain specifier pair to the power
22  - resets	   : Must contain an entry for each entry in reset-names.
24  - reset-names	   : Associated names must be: "axi", "sw", "reg".
25  - mediatek,phy-mode : A phandle to the system controller, used to enable
31 		compatible = "mediatek,mt7622-ahci",
32 			     "mediatek,mtk-ahci";
35 		interrupt-names = "hostc";
41 		clock-names = "ahb", "axi", "asic", "rbc", "pm";
43 		phy-names = "sata-phy";
44 		ports-implemented = <0x1>;
45 		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
49 		reset-names = "axi", "sw", "reg";
50 		mediatek,phy-mode = <&pciesys>;