Lines Matching +full:gp +full:- +full:pwm3
1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra186-pmc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Thierry Reding <thierry.reding@gmail.com>
11 - Jon Hunter <jonathanh@nvidia.com>
16 - nvidia,tegra186-pmc
17 - nvidia,tegra194-pmc
18 - nvidia,tegra234-pmc
24 reg-names:
27 - const: pmc
28 - const: wake
29 - const: aotag
30 - const: scratch
31 - const: misc
33 interrupt-controller: true
35 "#interrupt-cells":
40 nvidia,invert-interrupt:
48 const: nvidia,tegra186-pmc
54 reg-names:
61 reg-names:
65 "^[a-z0-9]+-[a-z0-9]+$":
83 Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
87 csia, csib, dsi, mipi-bias, pex-clk-bias, pex-clk3, pex-clk2,
88 pex-clk1, usb0, usb1, usb2, usb-bias, uart, audio, hsic, dbg,
89 hdmi-dp0, hdmi-dp1, pex-cntrl, sdmmc2-hv, sdmmc4, cam, dsib,
90 dsic, dsid, csic, csid, csie, dsif, spi, ufs, dmic-hv, edp,
91 sdmmc1-hv, sdmmc3-hv, conn, audio-hv, ao-hv
95 csia, csib, mipi-bias, pex-clk-bias, pex-clk3, pex-clk2,
96 pex-clk1, eqos, pex-clk-2-bias, pex-clk-2, dap3, dap5, uart,
97 pwr-ctl, soc-gpio53, audio, gp-pwm2, gp-pwm3, soc-gpio12,
98 soc-gpio13, soc-gpio10, uart4, uart5, dbg, hdmi-dp3, hdmi-dp2,
99 hdmi-dp0, hdmi-dp1, pex-cntrl, pex-ctl2, pex-l0-rst,
100 pex-l1-rst, sdmmc4, pex-l5-rst, cam, csic, csid, csie, csif,
101 spi, ufs, csig, csih, edp, sdmmc1-hv, sdmmc3-hv, conn,
102 audio-hv, ao-hv
110 low-power-enable:
114 low-power-disable:
118 power-source:
127 include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h
130 except for ao-hv. Following pads have software configurable
131 signaling voltages: sdmmc2-hv, dmic-hv, sdmmc1-hv, sdmmc3-hv,
132 audio-hv, ao-hv.
137 - pins
142 - compatible
143 - reg
144 - reg-names
149 interrupt-controller: ['#interrupt-cells']
150 "#interrupt-cells":
152 - interrupt-controller
155 - |
156 #include <dt-bindings/clock/tegra186-clock.h>
157 #include <dt-bindings/interrupt-controller/arm-gic.h>
158 #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
159 #include <dt-bindings/memory/tegra186-mc.h>
160 #include <dt-bindings/reset/tegra186-reset.h>
163 compatible = "nvidia,tegra186-pmc";
168 reg-names = "pmc", "wake", "aotag", "scratch";
169 nvidia,invert-interrupt;
171 sdmmc1_3v3: sdmmc1-3v3 {
172 pins = "sdmmc1-hv";
173 power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
176 sdmmc1_1v8: sdmmc1-1v8 {
177 pins = "sdmmc1-hv";
178 power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
183 compatible = "nvidia,tegra186-sdhci";
188 clock-names = "sdhci", "tmclk";
190 reset-names = "sdhci";
193 interconnect-names = "dma-mem", "write";
195 pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
196 pinctrl-0 = <&sdmmc1_3v3>;
197 pinctrl-1 = <&sdmmc1_1v8>;