Lines Matching full:when
186 * Field only valid when for the received frame type the corresponding
190 * Field only valid when for the received frame type the corresponding
254 * Field only valid when AST_based_lookup_valid == 1.
264 * When set, all frames (data only ?) shall be encrypted. If
277 * Field only valid when key_type is set to wep_varied_width.
282 * When set, the BSSID of the incoming frame matched one of
285 * Field only valid when bssid_hit is set.
290 * Field only valid when mpdu_qos_control_valid is set
307 * When set, the received frame was an NDP frame, and thus
310 * When set, a PHY error was received before MAC received any
314 * When set, a PHY error was received before MAC received the
318 * Set when RXPCU detected a version error in the Frame control
322 * When set, AST based lookup for this frame has found a valid
326 * When set, a ranging NDPA or a ranging NDP was received.
347 * When set, the field Mpdu_Frame_control_field has valid information
350 * When set, the field Mpdu_duration_field has valid information
353 * When set, the fields mac_addr_adx_..... have valid information
357 * When set, the fields mpdu_sequence_control_field and mpdu_sequence_number
364 * When set, the field mpdu_qos_control_field, mpdu_ht_control has valid
370 * When set, the encryption related info fields, like IV and
376 * Field only valid when Mpdu_sequence_control_valid is set
386 * Field only valid when Mpdu_frame_control_valid is set
391 * Field only valid when Mpdu_frame_control_valid is set
396 * Field only valid when Mpdu_frame_control_valid is set.
400 * Field only valid when Mpdu_frame_control_valid is set.
401 * Retry bit from the frame control. Only valid when first_msdu is set
404 * Field only valid when Mpdu_sequence_control_valid is set.
409 * Field only valid when Frame_encryption_info_valid is set
417 * When RXPCU sets bit 'ast_index_not_found or ast_index_timeout',
452 * Set when no 802.11 to nwifi/ethernet hdr conversion is done
462 * 0. The PPDU start status will only be valid when this bit
466 * Multicast / broadcast indicator. Only set when the MAC
468 * matches one of the 4 BSSID registers. Only set when
472 * Only valid when first_msdu is set. Indicates no AST matching
476 * Only valid when first_msdu is set. Indicates an unsuccessful
481 * when first_msdu is set.
484 * Set if packet is not a non-QoS data frame. Only set when
489 * data format. Only set when first_msdu is set.
492 * Set if packet is a management packet. Only set when
496 * Set if packet is a control packet. Only set when first_msdu
500 * Set if more bit in frame control is set. Only set when
505 * control field is set. Only set when first_msdu is set.
513 * set when first_msdu is set.
532 * Frame control field in header. Only valid when the field is marked valid.
535 * Duration field in header. Only valid when the field is marked valid.
538 * MAC addresses in the received frame. Only valid when corresponding
542 * QoS/HT control fields from header. Valid only when corresponding fields
569 * Multi-link receiver address1,2. Only valid when corresponding
805 * MPDU length before decapsulation. Only valid when first_msdu is
838 * of a dynamic A-MSDU when DA is compressed.
842 * of a dynamic A-MSDU when SA is compressed.
905 * valid when last_msdu is set.
943 * When set, this is a Mesh (11s) STA.
955 * set when either the more_frag bit is set in the frame control
956 * or the fragment number is not zero. Only set when first_msdu
1011 * The key ID octet from the IV. Only valid when first_msdu is set.
1058 * When set, use STBC transmission rates.
1141 * When set, this MSDU includes the 'Mesh Control' field
1168 * Field only valid when pkt type is HT, VHT or HE. Values are
1183 * Field only valid when
1217 * Timestamp that indicates when the PPDU that contained this MPDU
1242 * 0. The PPDU start status will only be valid when this bit
1246 * Multicast / broadcast indicator. Only set when the MAC
1248 * matches one of the 4 BSSID registers. Only set when
1252 * Only valid when first_msdu is set. Indicates no AST matching
1256 * Only valid when first_msdu is set. Indicates an unsuccessful
1261 * when first_msdu is set.
1264 * Set if packet is not a non-QoS data frame. Only set when
1269 * data format. Only set when first_msdu is set.
1272 * Set if packet is a management packet. Only set when
1276 * Set if packet is a control packet. Only set when first_msdu
1280 * Set if more bit in frame control is set. Only set when
1285 * control field is set. Only set when first_msdu is set.
1294 * set when first_msdu is set.