Lines Matching +full:0 +full:x0a0

55 #define	ANADIG_PLL3_CTRL	0x010	/* PLL3 Control */
56 #define	ANADIG_PLL7_CTRL	0x020	/* PLL7 Control */
57 #define	ANADIG_PLL2_CTRL	0x030	/* PLL2 Control */
58 #define	ANADIG_PLL2_SS		0x040	/* PLL2 Spread Spectrum */
59 #define	ANADIG_PLL2_NUM		0x050	/* PLL2 Numerator */
60 #define	ANADIG_PLL2_DENOM	0x060	/* PLL2 Denominator */
61 #define	ANADIG_PLL4_CTRL	0x070	/* PLL4 Control */
62 #define	ANADIG_PLL4_NUM		0x080	/* PLL4 Numerator */
63 #define	ANADIG_PLL4_DENOM	0x090	/* PLL4 Denominator */
64 #define	ANADIG_PLL6_CTRL	0x0A0	/* PLL6 Control */
65 #define	ANADIG_PLL6_NUM		0x0B0	/* PLL6 Numerator */
66 #define	ANADIG_PLL6_DENOM	0x0C0	/* PLL6 Denominator */
67 #define	ANADIG_PLL5_CTRL	0x0E0	/* PLL5 Control */
68 #define	ANADIG_PLL3_PFD		0x0F0	/* PLL3 PFD */
69 #define	ANADIG_PLL2_PFD		0x100	/* PLL2 PFD */
70 #define	ANADIG_REG_1P1		0x110	/* Regulator 1P1 */
71 #define	ANADIG_REG_3P0		0x120	/* Regulator 3P0 */
72 #define	ANADIG_REG_2P5		0x130	/* Regulator 2P5 */
73 #define	ANADIG_ANA_MISC0	0x150	/* Analog Miscellaneous */
74 #define	ANADIG_ANA_MISC1	0x160	/* Analog Miscellaneous */
75 #define	ANADIG_ANADIG_DIGPROG	0x260	/* Digital Program */
76 #define	ANADIG_PLL1_CTRL	0x270	/* PLL1 Control */
77 #define	ANADIG_PLL1_SS		0x280	/* PLL1 Spread Spectrum */
78 #define	ANADIG_PLL1_NUM		0x290	/* PLL1 Numerator */
79 #define	ANADIG_PLL1_DENOM	0x2A0	/* PLL1 Denominator */
80 #define	ANADIG_PLL1_PFD		0x2B0	/* PLL1_PFD */
81 #define	ANADIG_PLL_LOCK		0x2C0	/* PLL Lock */
83 #define	USB_VBUS_DETECT(n)		(0x1A0 + 0x60 * n)
84 #define	USB_CHRG_DETECT(n)		(0x1B0 + 0x60 * n)
85 #define	USB_VBUS_DETECT_STATUS(n)	(0x1C0 + 0x60 * n)
86 #define	USB_CHRG_DETECT_STATUS(n)	(0x1D0 + 0x60 * n)
87 #define	USB_LOOPBACK(n)			(0x1E0 + 0x60 * n)
88 #define	USB_MISC(n)			(0x1F0 + 0x60 * n)
91 #define	ENABLE_LINREG		(1 << 0)
99 #define	PLL4_CTRL_DIV_SEL_S	0
100 #define	PLL4_CTRL_DIV_SEL_M	0x7f
111 	{ SYS_RES_MEMORY,	0,	RF_ACTIVE },
112 	{ -1, 0 }
150 	return (0);  in enable_pll()
172 	return (0);  in pll4_configure_output()
189 	sc->bst = rman_get_bustag(sc->res[0]);  in anadig_attach()
190 	sc->bsh = rman_get_bushandle(sc->res[0]);  in anadig_attach()
211 	reg = READ4(sc, USB_MISC(0));  in anadig_attach()
213 	WRITE4(sc, USB_MISC(0), reg);  in anadig_attach()
219 #if 0  in anadig_attach()
220 	printf("USB_ANALOG_USB_MISC(0) == 0x%08x\n",  in anadig_attach()
221 	    READ4(sc, USB_ANALOG_USB_MISC(0)));  in anadig_attach()
222 	printf("USB_ANALOG_USB_MISC(1) == 0x%08x\n",  in anadig_attach()
226 	return (0);  in anadig_attach()
232 	{ 0, 0 }
241 DRIVER_MODULE(anadig, simplebus, anadig_driver, 0, 0);