Lines Matching +full:irq +full:- +full:can +full:- +full:wake
16 * 4. Neither the name of the author nor the names of any co-contributors
40 * userconfig can handle.
70 registers to their power-up values.
84 This register is write-only. The values are not sticky, that is,
89 #define WAKE 0x03 macro
95 pointer to the byte-serial device is reset. This register is
116 so that each card may be individually selected during a Wake[CSN]
127 device, this location should be a read-only value of 0x00.
130 /*** addresses 0x08 - 0x1F Card Level Reserved for future use ***/
131 /*** addresses 0x20 - 0x2F Card Level, Vendor Defined ***/
158 /*** addr 0x32 - 0x37 Logical Device Control Reserved for future use ***/
159 /*** addr 0x38 - 0x3F Logical Device Control Vendor Define ***/
169 Bit[1] specifies 8/16-bit control. This bit is set to indicate
170 16-bit memory, and cleared to indicate 8-bit memory.
171 Bit[0], if cleared, indicates the next field can be used as a range
175 the address. - - Bit[0] is read-only.
178 Offset 5-Offset 7: filler, unused.
194 byte 1 can be readonly if 1 type of int is used.
205 /*** 32-bit memory accesses are at 0x76 ***/
223 #define SM_RES_RESERVED 0xa-0xd
234 #define LG_RES_RESERVED 0x7-0x7f
246 u_long flags; /* OS-reserved flags */
251 u_char irq[2]; /* IRQ Number */ member
252 u_char irq_type[2]; /* IRQ Type */