Lines Matching full:logical
39 * the following is the maximum number of PnP Logical devices that
69 Bit[0] Reset all logical devices and restore configuration
73 all logical devices. This resets the contents of configuration
74 registers to their default state. All card's logical devices
78 Wait for Key state but all CSNs are preserved and logical devices
122 Selects the current logical device. All reads and writes of memory,
124 of the logical device written here. In addition, the I/O Range
125 Check and Activate commands operate only on the selected logical
126 device. This register is read/write. If a card has only 1 logical
135 For each logical device there is one activate register that controls
136 whether or not the logical device is active on the ISA bus. Bit[0],
137 if set, activates the logical device. Bits[7:1] are reserved and
139 logical device is activated, I/O range check must be disabled.
145 range programmed for use by a logical device.
149 is enabled. I/O range check is only valid when the logical
152 Bit[0], if set, forces the logical device to respond to I/O reads
153 of the logical device's assigned I/O range with a 0x55 when I/O
154 range check is in operation. If clear, the logical device drives
158 /*** addr 0x32 - 0x37 Logical Device Control Reserved for future use ***/
159 /*** addr 0x38 - 0x3F Logical Device Control Vendor Define ***/
248 u_char ldn; /* Logical Device Number */