Lines Matching +full:non +full:- +full:inverted

42 .Bl -enum -offset indent
69 In any other mode, drivers may be tri-stated by
74 This read-only register reflects the inputs on the parallel port interface.
76 .Bl -column "Bit" "Name" "Description" -compact
78 .It 7 Ta nBUSY Ta "inverted version of parallel port Busy signal"
90 .Bl -column "Bit" "Name " "Description" -compact
94 .It 3 Ta SELECTIN Ta "inverted and driven as parallel port nSelectin signal"
96 .It 1 Ta AUTOFEED Ta "inverted and driven as parallel port nAutoFd signal"
97 .It 0 Ta STROBE Ta "inverted and driven as parallel port nStrobe signal"
108 .Bd -literal
134 .Bl -bullet -offset indent
151 are microinstructions used to do either predefined standard IEEE1284-1994
152 transfers or programmed non-standard io.
153 .Ss MS_OP_RFETCH - Register FETCH
158 .Bl -enum -offset indent
168 .Ss MS_OP_RSET - Register SET
173 .Bl -enum -offset indent
183 .Ss MS_OP_RASSERT - Register ASSERT
187 .Bl -enum -offset indent
195 .Ss MS_OP_DELAY - microsecond DELAY
199 .Bl -enum -offset indent
205 .Ss MS_OP_SET - SET internal branch register
209 .Bl -enum -offset indent
215 .Ss MS_OP_DBRA - \&Do BRAnch
220 .Bl -enum -offset indent
228 .Ss MS_OP_BRSET - BRanch on SET
233 .Bl -enum -offset indent
243 .Ss MS_OP_BRCLEAR - BRanch on CLEAR
248 .Bl -enum -offset indent
258 .Ss MS_OP_RET - RETurn
267 .Bl -enum -offset indent
273 .Ss MS_OP_C_CALL - C function CALL
276 when a non-standard i/o is performed to retrieve a data character from the
280 .Bl -enum -offset indent
292 .Ss MS_OP_PTR - initialize internal PTR
297 .Bl -enum -offset indent
304 .Ss MS_OP_ADELAY - do an Asynchronous DELAY
310 .Bl -enum -offset indent
316 .Ss MS_OP_BRSTAT - BRanch on STATe
320 .Bl -enum -offset indent
336 .Ss MS_OP_SUBRET - SUBmicrosequence RETurn
346 .Ss MS_OP_CALL - submicrosequence CALL
351 .Bl -enum -offset indent
357 .Ss MS_OP_RASSERT_P - Register ASSERT from internal PTR
361 .Bl -enum -offset indent
369 .Ss MS_OP_RFETCH_P - Register FETCH to internal PTR
374 .Bl -enum -offset indent
384 .Ss MS_OP_TRIG - TRIG register
393 .Bl -enum -offset indent
411 .Bd -literal
431 .Bd -literal
449 MS_DBRA(-2 /* loop */),
459 .Bd -literal
473 actions like deciding whereas the transfer is IEEE1284-1994 compliant are