Lines Matching +full:fault +full:- +full:log +full:- +full:enable
93 to store jail-specific configuration options.
120 .Bl -tag -width indent-two
125 enable output of debug messages from rc scripts.
269 auto-jail the service with inherited filesystem and other
287 enable support for Automatic Power Management with
328 disable auto-loading of kernel modules with
332 A whitespace-separated list of kernel modules to be ignored by
346 A whitespace-separated list of kernel modules to be ignored by
350 A whitespace-separated list of kernel modules to load right after
386 A semi-colon
400 enable the system power control facility with the
413 Enable auto-jailing of all services which are not explicitly
440 .Dq Li "-S" ,
471 .Dq Li "-S" ,
503 Set to "YES" to enable saving of the
527 .Pa /var/db/mtree/BSD.var-run.mtree .
572 .Pa machine-id
587 .Dq Li -r
592 .Pa machine-id
594 .Pa /etc/machine-id .
641 This behavior can be overridden on a per-interface basis by replacing
680 .Bl -tag -width ".Li workstation" -compact
709 to enable firewall event logging.
734 .\" ----- firewall_nat_enable setting --------------------------------
800 .\" -------------------------------------------------------------------
805 will enable netflow logging via
814 (default
819 (default
824 (default
829 (default
839 (default is undefined meaning all FIBs).
848 to enable
879 .\" ----- ipfilter_enable setting --------------------------------
892 .Bd -literal
922 .Bd -literal
929 .\" ----- ipfilter_program setting ------------------------------
934 (default
936 .\" ----- ipfilter_rules setting --------------------------------
946 .\" ----- ipfilter_flags setting --------------------------------
953 .\" ----- ipnat_enable setting ----------------------------------
961 to enable
967 .\" ----- ipnat_program setting ---------------------------------
972 (default
974 .\" ----- ipnat_rules setting -----------------------------------
985 .\" ----- ipnat_flags setting -----------------------------------
992 .\" ----- ipmon_enable setting ----------------------------------
1000 to enable
1015 .\" ----- ipmon_program setting ---------------------------------
1020 (default
1022 .\" ----- ipmon_flags setting -----------------------------------
1026 .Dq Li -Ds
1032 .Dq Fl D Pa /var/log/ipflog
1040 .Bd -literal
1041 /var/log/ipflog 640 10 100 * Z /var/run/ipmon.pid
1043 .\" ----- ipfs_enable setting -----------------------------------
1051 to enable
1073 .\" ----- ipfs_program setting ----------------------------------
1078 (default
1080 .\" ----- ipfs_flags setting ------------------------------------
1087 .\" ----- end of added ipf hook ---------------------------------
1121 (default
1127 (default
1156 (default
1157 .Pa /etc/pf-fallback.conf ) .
1166 .Bd -literal
1168 block drop log all
1173 .Dq block drop log all
1195 (default
1196 .Pa /var/log/pflog ) .
1204 (default
1223 is set, for each whitespace-separated
1248 .Xr ftp-proxy 8
1256 .Xr ftp-proxy 8
1262 .Xr ftp-proxy 8
1265 should contain a whitespace-separated list of instance names.
1270 should be defined, containing the command-line flags to be passed to the
1271 .Xr ftp-proxy 8
1403 will cause the kernel to log ICMP REDIRECT packets.
1405 the log messages are not rate-limited, so this option should only be used
1454 .Dq Li .-/+
1465 as well as special case-insensitive keywords described below.
1471 .Bd -literal
1489 .Bd -literal
1495 Inter-Domain Routing
1499 .Li inet 192.0.2.5-23/24
1501 .Li inet6 2001:db8:1-f::1/64 .
1514 .Bd -literal
1519 .Li 192.0.2.5-23/24 ,
1521 addresses 192.0.2.6 to 192.0.2.23 with the non-conflicting prefix length /32 as
1533 .Bd -literal
1535 ifconfig_em0_alias3="inet 192.0.2.1-5/28"
1556 .Bd -literal
1575 .Bd -literal
1621 .Bd -literal
1631 .Bd -literal
1686 .Bd -literal
1707 .Pa /etc/hostapd- Ns Ao Ar interface Ac Ns .conf
1719 .Bd -literal
1734 .Bd -literal
1767 will be IPv6-preferred.
1773 will be IPv4-preferred.
1776 This controls initial configuration on IPv6-capable
1803 for an IPv6-capable interface should be sufficient.
1838 .Dq inet6 -no_radr accept_rtadv
1890 daemon using its MIB-2 module.
1908 .Bd -literal
1924 Note that a link-local address will be automatically configured in
1925 addition to the configured global-scope addresses because the IPv6
1934 If only a link-local address is needed on the interface,
1936 .Bd -literal
1940 A link-local address can also be configured manually.
1945 .Bd -literal
1952 addresses based on each prefix and the EUI-64 interface index will be
1959 .Bd -literal
1964 .Bd -literal
1971 These Subnet-Router anycast addresses will be added only when
1982 This variable is to enable configuring default address selection policy table
2000 installs a pre-defined policy table described in Section 10.3
2001 .Pq IPv4-preferred
2003 .Pq IPv6-preferred
2019 the IPv6-preferred one is used.
2020 Otherwise IPv4-preferred.
2056 This variable is to globally enable functionality of
2090 .Bd -literal
2108 Also used for per-profile overrides of
2115 .Dq Li .-/+
2190 A space-separated list of ZFS pool names for which new pool GUIDs should be
2196 A space-separated list of ZFS pool names for which the version should be
2206 will log if the system successfully (or not) booted from a GPT partition,
2227 Number of times user is asked for the pass-phrase.
2256 is remounted as read-write if this is set to
2258 Diskless systems that mount their root file system from a read-only remote
2299 List of file system types that are network-based.
2314 a whitespace-separated list of network file system descriptor pairs,
2317 and a human-readable, one-word description,
2339 (default
2360 (default
2381 (default
2461 the Kerberos 5 Password-Changing Daemon; set to
2470 this is the path to Kerberos 5 Password-Changing Daemon.
2482 (default
2525 A value of 2-10 seconds will substantially reduce network
2551 enable the server for NFSv4 as well as NFSv2 and NFSv3.
2562 enable the NFS server for NFSv4 only.
2573 daemon, which is needed for NFS-over-TLS NFS mounts.
2582 to support NFS-over-TLS NFS mounts.
2646 allow services like PCNFSD to make non-privileged mount
2698 (default
2773 A whitespace-separated list of NTP servers to synchronize with at startup.
2781 (default
2803 (default
2989 .Dq Nm arp Cm -S
2992 .Bd -literal
3005 .Dq Nm ndp Cm -s
3008 .Bd -literal
3027 .Bd -literal
3029 route_ext="-net 10.0.0.0/24 -gateway 192.168.0.1"
3030 route_mcast="-net 224.0.0.0/4 -iface gif0"
3031 route_gif0local="-host 169.254.1.1 -iface lo0"
3123 You may want to fine-tune
3144 enable global proxy ARP.
3153 source-routed packets are forwarded.
3158 the system will accept source-routed packets directed at it.
3197 Specify this entry to enable the 6to4 interface.
3201 An effective value is 0-31.
3222 to enable the
3261 If set to a non-null string, the virtual console's keyboard input is
3411 .Bl -tag -width ".Li x10mouseremote" -compact
3487 daemon is started for a non-default port, the
3493 is the name of the non-default port, i.e.,\&
3501 .Dq Li "-3"
3515 .Li 0xd0 Ns - Ns Li 0xd3
3531 will enable the mouse pointer on all virtual terminals
3560 (default
3574 enable the special handling of transitions to and from the
3583 (default
3622 .Dq Li -d ,
3692 to enable user and group disk quota checking via the
3709 .Dq Li "-a" ,
3722 .Dq Li "-a" ,
3735 .Dq Li "-a" ,
3742 to enable system accounting through the
3766 to enable Linux/ELF binary emulation at system initial
3799 Set to the list of 32-bit compatibility shared library paths to
3821 Set to the list of local 32-bit compatibility
3837 ranges from \-1 (the compile time default) to 3 (the
3881 as a stand-alone daemon at system boot time.
3932 This timeout will not be set when returning to the single-user mode
3956 Pairs of already-mounted
4037 A space-delimited list of jail names.
4057 Note that older releases supported per-jail configuration via
4065 These per-jail configuration variables are now obsolete in favor of
4069 when per-jail configuration variables are defined,
4075 The following per-jail parameters are handled by
4083 They must be a semi-colon
4091 .Bl -tag -width "host.hostname" -offset indent
4102 .Pa /var/log/jail_ Ns Ao Ar jname Ac Ns Pa _console.log .
4183 .\" -----------------------------------------------------
4186 Set to a bit-mask
4225 .Pa /var/db/entropy-file
4249 .Nm save-entropy
4254 .Nm save-entropy
4341 .Dq Li -CN ,
4342 which causes log files flagged with a
4427 .Bd -literal
4443 .Bd -literal
4451 enable support for sound mixer.
4456 enable Bluetooth security daemon.
4467 enable Bluetooth Service Discovery Protocol daemon.
4493 enable Bluetooth Human Interface Device daemon.
4511 enable Bluetooth RFCOMM PPP wrapper daemon.
4517 Also used to specify per-profile overrides.
4519 .Dq Li .-/+
4550 if it should register Dial-Up Networking service on the specified
4578 to enable user accounting through the
4585 delays the start of network-reliant services until
4604 This variable contains a space-delimited list of IP addresses to
4634 polled at a 1-second interval.
4658 A space-separated list of configuration files used by
4733 .Dq Li -Aa ,
4767 enable auto-loading of encryption keys for encrypted ZFS datasets.
4779 A whitespace-separated list of ZFS datasets to unlock.
4823 This will enable connecting hosts to negotiate STARTTLS allowing incoming
4871 a localhost-only listening SMTP service required for running
4873 as a non-set-user-ID binary.
4946 some destructive actions require removal of the action-specific safe-belts
4958 parent (if you allow child-jails in your jails, service jails
4967 .Bl -tag -width indent-two
5024 All non-network options can be combined with all other options.
5033 .Va svcj- Ns Ar name .
5037 variable allows to enable service jails for all services of the
5054 but allow to explicitely enable it.
5065 .Bl -tag -width "/etc/defaults/rc.conf" -compact