Lines Matching +full:- +full:gp

7 .\" SPDX-License-Identifier: BSD-2-Clause
28 interface class is Diagnostic Class and the subclass is DbC.GP.
32 This is designed to provide a general-purpose communication channel
42 The supported class in USB xHCs is typically DbC.GP,
44 The DbC.GP uses IN and OUT endpoint pairs and realizes a single
49 the DbC.GP is seen as a simple serial device.
51 Most systems with USB xHC can be configured to provide DbC.GP access.
54 is a driver that connects to DbC.GP-supported devices,
61 A native DbC.GP device can be attached using the
65 A USB xHC DbC.GP device on a target system needs a special hardware
67 There is one method to expose DbC.GP is to use a USB 3.1 A-to-A cable
70 the DbC-enabled USB xHC automatically switches the port as a USB Device.
73 driver can find a DbC.GP device on that port.
76 .Pq USB Type-C connectors
77 is not compatible with the USB 3.1 A-to-A cable.
78 Connecting a USB 3.2 C-to-C cable or A-to-C cable does not automatically work,
84 .Bl -tag -width "/dev/ttyU*.*.init" -compact
89 corresponding callin initial-state and lock-state devices
95 corresponding callout initial-state and lock-state devices
105 …content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interfac…
113 .%U https://www.usb.org/document-library/usb-31-legacy-cable-and-connector-revision-10
122 .An -nosplit