Lines Matching +full:digital +full:- +full:to +full:- +full:analog

15 .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
35 .Bd -ragged -offset indent
40 Alternatively, to load the driver as a module at boot time, place the
43 .Bd -literal -offset indent
51 to attach to RME HDSP audio devices.
57 .Bl -bullet -compact
59 RME HDSP 9632 (optional AO4S-192 and AIS-192 extension boards)
66 device corresponds to a physical port on the sound card.
69 (32kHz-48kHz) and 4 channels at double speed (64kHz-96kHz).
70 Only the HDSP 9632 can operate at quad speed (128kHz-192kHz), ADAT is
73 be mapped to ADAT channels and vice versa.
79 .Bl -tag -width indent
81 If set to 1, all physical ports are combined into one unified pcm device.
82 When opened in multi-channel audio software, this makes all ports available
86 .Bl -column "Sound Card" "Single Speed" "Double Speed" "Quad Speed"
90 .It HDSP 9652 Ta " 26  |  26" Ta " 14  |  14" Ta "  -  |   -"
101 .Bl -tag -width indent
103 Set a fixed sample rate from 32000, 44100, 48000, up to 192000.
104 This is usually required for digital connections (AES, S/PDIF, ADAT).
105 The default value of 0 adjusts the sample rate according to pcm device settings.
107 The number of samples processed per interrupt, from 32, 64, 128, up to 4096.
109 due to frequent interrupt processing.
112 Lists possible clock sources to sync with, depending on the hardware model.
113 This includes internal and external master clocks as well as incoming digital
117 HDSP cards will sync to this clock source when available, but fall back to
118 auto-sync with any other digital clock signal they receive.
119 Set this to
124 This differs from what is set as clock preference when in auto-sync mode.
133 for accurately synchronized signals (required for recording digital
137 The following tunables are applicable to HDSP 9632 devices only:
138 .Bl -tag -width indent
140 Select the sensitivity of the analog line input.
145 .Ql -10dBV .
147 Select the gain level of the analog line output.
152 .Ql -10dBV .
154 Adjust the gain level of the phones output, separately from the analog line
170 .An -nosplit
175 All adaptation to HDSP cards by