Lines Matching +full:15 +full:- +full:input
1 .\" Copyright (c) 2006-2008 Joel Dahl <joel@FreeBSD.org>
35 .Bd -ragged -offset indent
43 .Bd -literal -offset indent
77 HDMI audio input/output.
90 .Ss Boot-time Configuration
91 The following variables are available at boot-time through the
94 .Bl -tag -width ".Va hint.hdac.%d.config"-offset indent
162 May be specified as a set of space-separated
174 .Dq Li input .
184 May be specified as a 32-bit hexadecimal value with a leading
186 or as a set of space-separated
191 .Bl -tag -width 2n -compact
200 connected input using jack presence detection statuses.
214 .Bl -tag -width ".Va device=" -offset indent
217 Associations are used to group individual pins to form a complex multi-pin
219 For example, to group 4 connectors for 7.1 input/output, or to treat several
220 input connectors as sources for the same input device.
221 Association numbers can be specified as numeric values from 0 to 15.
223 A value of 15 is a set of independent unassociated pins.
226 A separate PCM audio device is created for every pair of input and
230 A unique, per-association number used to order pins inside the
232 Sequence numbers can be specified as numeric values from 0 to 15.
234 The sequence number 15 has a special meaning for output associations.
240 The sequence numbers 14 and 15 has a special meaning for input associations.
243 the association will provide multichannel input.
245 For multichannel input/output associations sequence numbers encode
247 0 - Front, 1 - Center/LFE, 2 - Back, 3 - Front Wide Center, 4 - Side.
248 Standard combinations are: (0) - Stereo; (0, 2), (0, 4) - Quadro;
249 (0, 1, 2), (0, 1, 4) - 5.1; (0, 1, 2, 4) - 7.1.
252 Can be specified as a number from 0 to 15 or as a name:
253 .Dq Li Line-out ,
257 .Dq Li SPDIF-out ,
258 .Dq Li Digital-out ,
259 .Dq Li Modem-line ,
260 .Dq Li Modem-handset ,
261 .Dq Li Line-in ,
265 .Dq Li SPDIF-in ,
266 .Dq Li Digital-in ,
273 always means an input pin, while
290 Can be specified as a number from 0 to 15.
297 Can be specified as a number from 0 to 15 or as one of the names
328 Can be specified as a number from 0 to 15.
338 .Bl -tag -width ".Va dev.hdaa.%d.nid%d_original" -offset indent
340 Setting this to a non-zero value dumps the current pin configuration, main
353 Run-time equivalent of the
361 Run-time equivalent of the
367 Run-time equivalent of the
373 Setting this to a non-zero value makes driver to destroy existing pcm devices
383 Run-time equivalent of the
394 All codec pins are reversible (could be configured either as input or output).
399 .Bd -literal
401 hdaa0: 20 01014020 2 0 Line-out Jack 1/8 Rear Green 0
403 hdaa0: 22 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
404 hdaa0: 23 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
406 hdaa0: 25 02a1983f 3 15 Mic Jack 1/8 Front Pink 8
407 hdaa0: 26 01813031 3 1 Line-in Jack 1/8 Rear Blue 0
408 hdaa0: 27 0221401f 1 15 Headphones Jack 1/8 Front Green 0
409 hdaa0: 28 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
410 hdaa0: 30 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
411 hdaa0: 31 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
416 (Jack, Rear) and nid 21 is a built-in speaker (Fixed, Onboard).
423 .Bd -literal
426 hdaa0: Pin nid=27 seq=15
432 hdaa0: Pin nid=25 seq=15
449 .Ar Line-out
454 .Ar Line-in
472 .Bd -literal
477 will swap line-out and speaker functions.
480 device will play to the line-out and headphones jacks.
481 Line-out will be muted on the headphones jack connection.
484 will go from two external microphones and line-in jacks.
491 .Bd -literal
492 hint.hdac.0.cad0.nid20.config="as=1 seq=15 device=Headphones"
500 device will play to the internal speaker and to the line-out jack, with
501 speaker automute on the line-out jack connection.
504 will use input from one external microphone and the line-in jacks.
513 .Bd -literal
518 hint.hdac.0.cad0.nid24.config="as=5 seq=0 device=Line-out"
524 .Pq line-out and line-in ,
528 .Pq additional line-out via retasked rear mic jack ,
536 .Bd -literal
538 hint.hdac.0.cad0.nid24.config="as=1 seq=1 device=Line-out"
539 hint.hdac.0.cad0.nid26.config="as=1 seq=2 device=Line-out"
545 for 5.1 playback via 3 rear connectors (line-out and retasked
546 mic and line-in) and headset (headphones and mic) at front connectors.
554 .Bl -tag -width ".Va speaker" -offset indent
560 input-to-output monitoring loopback level
566 input mix
568 first external or second internal microphone input
570 first internal or second external microphone input
576 CD input
578 PC speaker input
609 .An -nosplit
635 Some vendors use non-standardized General Purpose I/O (GPIO) pins of the codec