Lines Matching +full:is +full:- +full:dual
15 .\" 4. Neither the name of the author nor the names of any co-contributors
19 .\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
36 .Nd "SysKonnect SK-984x and SK-982x PCI Gigabit Ethernet adapter driver"
41 .Bd -ragged -offset indent
49 .Bd -literal -offset indent
55 driver provides support for the SysKonnect SK-984x and SK-982x series PCI
65 allowing dual-port NIC configurations.
67 The SK-982x 1000baseT adapters also include a Broadcom BCM5400 1000baseTX
68 PHY which is used in place of the XMAC's internal PHY.
69 The Broadcom PHY is connected to the XMAC via its GMII port.
73 driver configures dual port SysKonnect adapters such that each XMAC
79 second port on dual port adapters for failover purposes: if the link
83 Also supported is the Marvell Semiconductor 88E100* gigabit PHY.
88 Support for jumbo frames is provided via the interface MTU setting.
98 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
107 This is only available
108 for SK-982x series adapters with 1000baseT ports.
110 .Ar full-duplex
112 .Ar half-duplex
117 .Ar full-duplex
119 .Ar half-duplex
126 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
127 .It full-duplex
129 .It half-duplex
140 .Bl -bullet -compact
144 3Com 3C2000-T single port, 1000baseT adapter
148 D-Link DGE-530T single port, 1000baseT adapter
152 SK-9521 SK-NET GE-T single port, 1000baseT adapter
154 SK-9821 SK-NET GE-T single port, 1000baseT adapter
156 SK-9822 SK-NET GE-T dual port, 1000baseT adapter
158 SK-9841 SK-NET GE-LX single port, single mode fiber adapter
160 SK-9842 SK-NET GE-LX dual port, single mode fiber adapter
162 SK-9843 SK-NET GE-SX single port, multimode fiber adapter
164 SK-9844 SK-NET GE-SX dual port, multimode fiber adapter
173 .Bl -tag -width xxxxxx
176 Systems with less memory can set it to a non-zero value to save memory.
177 The default value is 0.
180 The following variable is available as both
185 .Bl -tag -width xxxxxx
188 The accepted range is 10 to 10000.
189 The default value is 100 microseconds.
193 .Bl -diag
201 The driver failed to allocate memory for per-device instance information
206 happen if the card is not in a bus-master slot.
211 The device has stopped responding to the network, or there is a problem with
224 .%U https://people.freebsd.org/~wpaul/SysKonnect/xmacii_datasheet_rev_c_9-29.pdf