Lines Matching +full:supported +full:- +full:hw

1 .\" Copyright (c) 2011-2016 Solarflare Communications Inc.
39 .Bd -ragged -offset indent
46 .Bd -literal -offset indent
57 and Receive Side Scaling (RSS) using MSI-X interrupts.
88 .Bl -tag -width indent
89 .It Va hw.sfxge.rx_ring
91 Supported values are: 512, 1024, 2048 and 4096.
92 .It Va hw.sfxge.tx_ring
94 Supported values are: 512, 1024, 2048 and 4096.
95 .It Va hw.sfxge.tx_dpl_get_max
97 .Dq get-list
98 for queued transmit packets (TCP and non-TCP), used only if the transmit
104 .It Va hw.sfxge.tx_dpl_get_non_tcp_max
105 The maximum number of non-TCP packets in the deferred packet
106 .Dq get-list
112 .It Va hw.sfxge.tx_dpl_put_max
114 .Dq put-list
121 .It Va hw.sfxge.tso_fw_assisted
122 Bitmask to enable/disable usage of FW-assisted TSO version if supported
124 FATSOv1 (bit 0) and FATSOv2 (bit 1) are supported.
126 .It Va hw.sfxge.N.max_rss_channels
130 .It Va hw.sfxge.lro.table_size
134 .It Va hw.sfxge.lro.chain_max
138 .It Va hw.sfxge.lro.idle_ticks
141 .It Va hw.sfxge.lro.slow_start_packets
142 Number of packets with payload that must arrive in-order before a connection
145 slow-start because reducing the ACK rate can damage performance.
146 .It Va hw.sfxge.lro.loss_packets
147 Number of packets with payload that must arrive in-order following loss
151 .It Va hw.sfxge.mcdi_logging
152 Enable logging of MCDI protocol messages  (only available if enabled at compile-time).
153 .It Va hw.sfxge.N.mcdi_logging
154 Enable or disable logging of MCDI protocol messages on a per-port basis.
156 .Va hw.sfxge.mcdi_logging.
159 .It Va hw.sfxge.stats_update_period_ms
163 Supported on SFN8xxx series adapters with firmware v6.2.1.1033 and later and