Lines Matching +full:multi +full:- +full:protocol

1 .\" Copyright (c) 1996-1999 Whistle Communications, Inc.
19 .\" MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
41 .Nd PPP protocol netgraph node type
48 node type performs multiplexing for the PPP protocol.
49 It handles only packets that contain data, and forwards protocol negotiation
51 user-land daemon).
54 user-land implementations.
56 multi-link PPP, Van Jacobson compression, PPP compression, PPP
58 A single PPP node corresponds to one PPP multi-link bundle.
67 hook which is used to handle any protocol not directly supported
71 Typically this node is connected to a user-land daemon via a
94 These device-independent hooks transmit and receive full PPP
95 frames, which include the PPP protocol, address, control, and
96 information fields, but no checksum or other link-specific fields.
98 On outgoing frames, when protocol compression
99 has been enabled and the protocol number is suitable for compression,
100 the protocol field will be compressed (i.e., sent as one byte
102 Either compressed or uncompressed protocol fields
187 Only bundle-level compression and encryption is directly supported;
188 link-level compression and encryption can be handled transparently
208 When a frame is received on a link with an unsupported protocol,
209 or a protocol which is disabled or for which the corresponding hook
217 multi-link protocol), the special link number
220 After the two byte link number is the two byte PPP protocol number
222 The PPP protocol number is two bytes long even if the original frame
223 was protocol compressed.
229 stripped off, the PPP protocol number is prepended (possibly compressed),
233 the frame will be delivered over the multi-link bundle; or, if multi-link
239 the protocol) or with an LCP protocol reject (if it does not recognize
240 or expect the protocol).
242 To enable multi-link PPP, the corresponding configuration flag must be set
245 one link to be connected if multi-link is not enabled, nor will it allow
246 certain multi-link settings to be changed while multi-link operation is
259 .Em round-robin
264 When configured for round-robin delivery, the latency and bandwidth
271 of sub-optimal overall bundle latency, which is important for
272 interactive response time, and sub-optimal overall bundle bandwidth
291 .Bl -tag -width ".Va vjc_vjuncomp"
333 a link number and a PPP protocol number.
337 .Bl -tag -width foo
341 multi-link PPP, encryption, compression, Van Jacobson compression, and IP,
343 It includes per-link configuration,
345 and enabling protocol field compression.
351 .Bd -literal -offset 0n
352 /* Per-link config structure */
355   u_char    enableProtoComp;/* enable protocol field compression */
395 is a valid link number corresponding to the multi-link bundle.
440 .%T "The Point-to-Point Protocol (PPP)"
449 .%T "The PPP Multilink Protocol (MP)"