Lines Matching full:station
108 The 802.11n specification says a compliant station must receive AMPDU but
144 The 802.11n specification says a compliant station must receive AMSDU but
200 When this value is non-zero and operating in station mode
201 the station will periodically leave
210 the minimum time (msecs) a station must be idle
230 configured locally (e.g. for an IBSS network started by the local station)
232 For WDS interfaces this value is the address of the remote station.
288 When 802.11d is enabled in station mode, Beacon frames that advertise
291 This event can be used by the station to adopt that country code and
353 will not interoperate with a purely 11n-compliant station.
472 a station will sleep before waking to retrieve packets buffered by
512 Return station roaming parameters in the buffer pointed to by
518 state machine when operating as a station in an Infrastructure BSS.
566 Return information about the current state of the specified station(s) via
568 The MAC address of a single station may be passed in or, if the broadcast
570 If a single station is requested and the MAC address is unknown then
574 Return collected statistics for the specified station via
576 The MAC address of the desired station is passed in; if it is unknown
580 Return any VLAN tag assigned to a station via
583 Return the slot number for the station in
585 Slot number zero is the master station in a TDMA network.
591 station in the network in
712 Return any WPA information element for an associated station via
716 identifies the MAC address of the desired station.
723 Return any WPA information elements for an associated station via
727 identifies the MAC address of the desired station.
735 A key number of zero is used to retrieve a station's unicast cipher key
839 Set the minimum time (in msecs) a station must be idle
1073 Explicitly control the MLME state machine for a station using the
1080 (diassociate the specified station),
1082 (deauthenticate the specified station),
1084 (mark the specified station authorized to pass data frames),
1086 (revoke the specified station's ability to pass data frames),
1146 Set station roaming parameters using the data pointed to by
1203 Clear accumulated statistics for the specified station.
1205 Set the VLAN tag for the specified station using the information pointed to by
1223 Set the length of the TDMA slot assigned to each station in the network