Lines Matching +full:operating +full:- +full:mode

1 .\"-
51 .Bl -tag -width ".Dv SIOCG80211"
62 .Bd -literal
73 -1 and set the global variable errno to
78 or in a user-specified buffer pointed to by
96 .Bl -tag -width indent
101 and is used only when operating on an HT channel.
137 and is used only when operating on an HT channel.
162 This value will be non-zero when AP bridging is enabled and otherwise zero.
180 Return the current authentication mode in
200 When this value is non-zero and operating in station mode
238 If this value is non-zero then the system will try to send packets closely
261 This value will be non-zero when Countermeasures are enabled and
267 attributes that describe the operating constraints (e.g. Passive Scan,
280 according to a least-congested criteria.
288 When 802.11d is enabled in station mode, Beacon frames that advertise
293 When operating as an access point with 802.11d enabled the Beacon and
310 non-zero if they are to be discarded.
319 Infrastructure BSS associations using 4-address (WDS) frames.
323 whether Atheros fast-frames support is enabled.
324 Fast-frames is a non-standard protocol extension that aggregates multiple
326 Note that enabling fast-frames support does not guarantee use;
338 This  setting is meaningful only when operating with 802.11n on an HT channel.
343 SSID hiding is only meaningful when operating as an access point.
346 This value will be non-zero when SSID hiding is enabled and otherwise zero.
353 will not interoperate with a purely 11n-compliant station.
382 Return the setting for Mesh root mode operation in
386 (root mode is disabled),
460 Return the current powersaving mode in
479 non-zero when PRIVACY is enabled.
481 Return the current 802.11g protection mode in
483 Protection is the mechanism used to safeguard 802.11b stations operating
494 Return whether ``pure 11g'' mode is enabled in
497 when non-zero, 802.11b stations will not be allowed to associate.
499 Return whether ``pure 11n'' mode is enabled in
502 when non-zero, legacy (non-11n capable) stations will not be
510 This  setting is meaningful only when operating with 802.11n on an HT channel.
515 Return the current roaming mode in
517 Roaming mode specifies which entity controls operation of the MLME
518 state machine when operating as a station in an Infrastructure BSS.
544 Note SGI is only used when operating with 802.11n on an HT channel.
548 This setting is meaningful only when operating with 802.11n on an HT channel.
601 Return whether Atheros Dynamic Turbo mode is enabled in
603 Dynamic Turbo mode is a non-standard protocol extension available only
606 Note that enabling Dynamic Turbo mode support does not guarantee use;
616 the maximum power allowed by local regulations, any user-specified
619 Return the user-specified maximum transmit power in .5 dBm units in
644 and may be 0-3.
655 This value will be non-zero when support is enabled and otherwise zero.
734 and may be 0-3.
736 when operating with WPA enabled.
739 Return whether or not Wi-FI Protected Setup (WPS) is enabled in
760 .Bl -tag -width indent
774 This request causes a running interface operating on an HT channel
797 This request causes a running interface operating on an HT channel
824 Set the current authentication mode using the value in
883 This request can only be used when the authentication mode is set
943 Set whether Atheros fast-frames support is enabled using the value in
973 This request causes a running interface to be reset if operating on HT channel.
995 Values must be in the range [0-255].
997 Set the Mesh root mode operation according to
1001 (root mode is disabled),
1090 Note when this facility is used for stations operating in infrastructure mode
1091 the roaming mode should be set to manual.
1093 Set the current powersaving mode to the value in
1110 Set the current 802.11g protection mode to the value in
1118 Set whether ``pure 11g'' mode is enabled using the value in
1125 Set whether ``pure 11n'' mode is enabled using the value in
1143 This  setting is meaningful only when operating with 802.11n on an HT channel.
1149 Set the current roaming mode to the value in
1188 Note SGI is only used when operating on an HT (802.11n) channel.
1215 Values must be in the range [0-slotcnt].
1227 (though values outside the range 1-200ms are unlikely to work well).
1234 Set whether Atheros Dynamic Turbo mode is enabled using the value in
1246 Set the current WEP mode to the value in
1316 Set whether or not Wi-FI Protected Setup (WPS) is enabled using the value in