Lines Matching full:enabled

98 Return whether or not AMPDU is enabled in
104 1 (AMPDU enabled for transmit),
105 2 (AMPDU enabled for receive),
107 3 (AMPDU enabled for transmit and receive).
134 Return whether or not AMSDU is enabled in
140 1 (AMSDU enabled for transmit),
141 2 (AMSDU enabled for receive),
143 3 (AMSDU enabled for transmit and receive).
156 Return whether AP bridging is enabled in
162 This value will be non-zero when AP bridging is enabled and otherwise zero.
198 Return whether background scanning is enabled in
236 Return whether or not packet bursting is enabled in
259 Return whether TKIP Countermeasures are enabled in
261 This value will be non-zero when Countermeasures are enabled and
276 Return whether or not Dynamic Frequency Selection (DFS) is enabled in
283 By default DFS is enabled according to the regulatory definitions
286 Return whether or not 802.11d support is enabled in
288 When 802.11d is enabled in station mode, Beacon frames that advertise
293 When operating as an access point with 802.11d enabled the Beacon and
297 Return whether 802.11h support is enabled in
299 When 802.11h is enabled Beacon and ProbeResponse frames will have
304 By default 802.11h is enabled if the device is capable.
317 whether or not Dynamic WDS support is enabled.
323 whether Atheros fast-frames support is enabled.
337 whether or not Greenfield preamble use is enabled.
342 whether SSID hiding/cloaking is enabled.
344 When this is enabled Beacon frames do not include the SSID and
346 This value will be non-zero when SSID hiding is enabled and otherwise zero.
350 whether or not 802.11n compatibility support is enabled.
356 When compatibility support is enabled both standard and compatible data
374 (no protection enabled)
407 When inactivity processing is enabled the system will track stations
424 module must be installed and enabled or
428 Return whether or not Mesh AP support is enabled in
434 Return whether or not packet forwarding support is enabled in
467 (power save operation is enabled).
477 When PRIVACY is enabled all data packets must be encrypted.
479 non-zero when PRIVACY is enabled.
487 (no protection enabled),
494 Return whether ``pure 11g'' mode is enabled in
499 Return whether ``pure 11n'' mode is enabled in
508 Return whether or not Reduced InterFrame Spacing (RIFS) is enabled in
542 Return whether or not Short Guard Interval (SGI) is enabled in
551 (Dynamic SMPS is enabled),
553 (Static SMPS is enabled),
598 Return whether or not Transitional Security Network (TSN) is enabled in
601 Return whether Atheros Dynamic Turbo mode is enabled in
608 be enabled on both sides.
653 Return whether 802.11e/WME/WMM support is enabled in
655 This value will be non-zero when support is enabled and otherwise zero.
706 0 (WPA is not enabled),
707 1 (WPA1 is enabled),
708 2 (WPA2/802.11i is enabled),
710 3 (WPA1 and WPA2/802.11i are both enabled).
736 when operating with WPA enabled.
739 Return whether or not Wi-FI Protected Setup (WPS) is enabled in
767 module must be installed and enabled or
771 Set whether or not AMPDU is enabled for transmit and/or receive
794 Set whether or not AMSDU is enabled for transmit and/or receive
810 Set whether AP bridging is enabled using the value in
836 Set whether background scanning is enabled using the value in
855 Set whether or not packet bursting is enabled using the value in
881 Set whether TKIP Countermeasures are enabled using the value in
902 module must be installed and enabled or
906 Set whether or not Dynamic Frequency Selection (DFS) is enabled
911 if 802.11h support is not enabled.
916 Set whether or not 802.11d support is enabled using the value in
923 Return whether 802.11h support is enabled using the value in
937 Set whether or not Dynamic WDS support is enabled using the value in
943 Set whether Atheros fast-frames support is enabled using the value in
957 Set whether or not Greenfield preamble use is enabled using the value in
964 Set whether SSID hiding/cloaking is enabled using the value in
971 Set whether or not 802.11n compatibility support is enabled using the value in
1012 When inactivity processing is enabled the system will track stations
1038 Set whether or not Mesh AP support is enabled using
1041 Set whether or not packet forwarding support is enabled using
1118 Set whether ``pure 11g'' mode is enabled using the value in
1125 Set whether ``pure 11n'' mode is enabled using the value in
1140 Set whether or not Reduced InterFrame Spacing (RIFS) is enabled
1186 Set whether or not Short Guard Interval (SGI) is enabled using the value in
1230 Set whether or not Transitional Security Network (TSN) is enabled
1234 Set whether Atheros Dynamic Turbo mode is enabled using the value in
1269 Set whether or not WME/WMM support is enabled using the value in
1316 Set whether or not Wi-FI Protected Setup (WPS) is enabled using the value in