Lines Matching +full:current +full:- +full:channel

1 .\"-
51 .Bl -tag -width ".Dv SIOCG80211"
62 .Bd -literal
73 -1 and set the global variable errno to
78 or in a user-specified buffer pointed to by
96 .Bl -tag -width indent
101 and is used only when operating on an HT channel.
137 and is used only when operating on an HT channel.
162 This value will be non-zero when AP bridging is enabled and otherwise zero.
180 Return the current authentication mode in
200 When this value is non-zero and operating in station mode
202 the current channel and scan for neighboring stations.
227 Return the MAC address for the current BSS identifier via
238 If this value is non-zero then the system will try to send packets closely
244 channel specifications (frequency and attributes) and IEEE channel numbers
248 Return the current list of usable channels via
250 The channel list is returned as a bit vector with bit N set to 1 if
251 IEEE channel number N is available for use.
253 Return the IEEE channel number of the current channel in
261 This value will be non-zero when Countermeasures are enabled and
264 Return information for the current channel via
266 This information includes the IEEE channel number, the frequency, and
279 radar signals, dynamic transmit power control, and channel selection
280 according to a least-congested criteria.
284 and the current country code, regdomain, and channel.
294 ProbeResponse frames transmitted will advertise the current regulatory
302 802.11h support also includes handling Channel Switch Announcements (CSA)
303 which are a mechanism to coordinate channel changes by an access point.
310 non-zero if they are to be discarded.
319 Infrastructure BSS associations using 4-address (WDS) frames.
323 whether Atheros fast-frames support is enabled.
324 Fast-frames is a non-standard protocol extension that aggregates multiple
326 Note that enabling fast-frames support does not guarantee use;
338 This  setting is meaningful only when operating with 802.11n on an HT channel.
346 This value will be non-zero when SSID hiding is enabled and otherwise zero.
353 will not interoperate with a purely 11n-compliant station.
361 Promotion happens when the system must select a channel and may choose
416 (to retrieve the current policy in
460 Return the current powersaving mode in
475 Return the current MLME setting for PRIVACY in
479 non-zero when PRIVACY is enabled.
481 Return the current 802.11g protection mode in
497 when non-zero, 802.11b stations will not be allowed to associate.
502 when non-zero, legacy (non-11n capable) stations will not be
510 This  setting is meaningful only when operating with 802.11n on an HT channel.
515 Return the current roaming mode in
533 Return the current contents of the scan cache in the data area pointed to by
544 Note SGI is only used when operating with 802.11n on an HT channel.
548 This setting is meaningful only when operating with 802.11n on an HT channel.
566 Return information about the current state of the specified station(s) via
603 Dynamic Turbo mode is a non-standard protocol extension available only
604 on Atheros devices where channel width is dynamically
616 the maximum power allowed by local regulations, any user-specified
619 Return the user-specified maximum transmit power in .5 dBm units in
623 Return the current WEP status in
644 and may be 0-3.
655 This value will be non-zero when support is enabled and otherwise zero.
662 parameter for the BSS or the channel is desired.
688 This value is meaningful only for the BSS (not channel).
698 This value is meaningful only for the channel (not BSS).
734 and may be 0-3.
739 Return whether or not Wi-FI Protected Setup (WPS) is enabled in
760 .Bl -tag -width indent
774 This request causes a running interface operating on an HT channel
797 This request causes a running interface operating on an HT channel
824 Set the current authentication mode using the value in
859 Set the desired/current channel to the value given by
862 immediately change to the specified channel if possible;
868 Set the list of available channels using the channel list pointed to by
870 The channel list is a bit vector with bit N set to 1 if
871 IEEE channel number N is available for use.
872 The specified channel list is checked against the set of supported
874 If the intersection of the channel list and the supported channels is empty
877 Note the current channel may be marked invalid after installing a
878 new channel list.
888 Set the current channel using the information referenced by
891 immediately change to the specified channel if possible;
943 Set whether Atheros fast-frames support is enabled using the value in
973 This request causes a running interface to be reset if operating on HT channel.
995 Values must be in the range [0-255].
1020 (set the current policy to disable ACL use),
1022 (set the current policy to allow only addresses listed in the database),
1024 (set the current policy to deny addresses listed in the database),
1026 (set the current policy to enable use of a RADIUS backend),
1093 Set the current powersaving mode to the value in
1104 Set the current MLME setting for PRIVACY using the value in
1110 Set the current 802.11g protection mode to the value in
1138 Note the new regulatory data may invalidate any desired channel.
1143 This  setting is meaningful only when operating with 802.11n on an HT channel.
1149 Set the current roaming mode to the value in
1188 Note SGI is only used when operating on an HT (802.11n) channel.
1213 Set the current TDMA slot to the value in
1215 Values must be in the range [0-slotcnt].
1227 (though values outside the range 1-200ms are unlikely to work well).
1246 Set the current WEP mode to the value in
1316 Set whether or not Wi-FI Protected Setup (WPS) is enabled using the value in