Lines Matching +full:channel +full:- +full:spacing
1 .\"-
51 .Bl -tag -width ".Dv SIOCG80211"
62 .Bd -literal
73 -1 and set the global variable errno to
78 or in a user-specified buffer pointed to by
96 .Bl -tag -width indent
101 and is used only when operating on an HT channel.
137 and is used only when operating on an HT channel.
162 This value will be non-zero when AP bridging is enabled and otherwise zero.
200 When this value is non-zero and operating in station mode
202 the current channel and scan for neighboring stations.
238 If this value is non-zero then the system will try to send packets closely
244 channel specifications (frequency and attributes) and IEEE channel numbers
250 The channel list is returned as a bit vector with bit N set to 1 if
251 IEEE channel number N is available for use.
253 Return the IEEE channel number of the current channel in
261 This value will be non-zero when Countermeasures are enabled and
264 Return information for the current channel via
266 This information includes the IEEE channel number, the frequency, and
279 radar signals, dynamic transmit power control, and channel selection
280 according to a least-congested criteria.
284 and the current country code, regdomain, and channel.
302 802.11h support also includes handling Channel Switch Announcements (CSA)
303 which are a mechanism to coordinate channel changes by an access point.
310 non-zero if they are to be discarded.
319 Infrastructure BSS associations using 4-address (WDS) frames.
323 whether Atheros fast-frames support is enabled.
324 Fast-frames is a non-standard protocol extension that aggregates multiple
326 Note that enabling fast-frames support does not guarantee use;
338 This setting is meaningful only when operating with 802.11n on an HT channel.
346 This value will be non-zero when SSID hiding is enabled and otherwise zero.
353 will not interoperate with a purely 11n-compliant station.
361 Promotion happens when the system must select a channel and may choose
479 non-zero when PRIVACY is enabled.
497 when non-zero, 802.11b stations will not be allowed to associate.
502 when non-zero, legacy (non-11n capable) stations will not be
508 Return whether or not Reduced InterFrame Spacing (RIFS) is enabled in
510 This setting is meaningful only when operating with 802.11n on an HT channel.
544 Note SGI is only used when operating with 802.11n on an HT channel.
548 This setting is meaningful only when operating with 802.11n on an HT channel.
603 Dynamic Turbo mode is a non-standard protocol extension available only
604 on Atheros devices where channel width is dynamically
616 the maximum power allowed by local regulations, any user-specified
619 Return the user-specified maximum transmit power in .5 dBm units in
644 and may be 0-3.
655 This value will be non-zero when support is enabled and otherwise zero.
662 parameter for the BSS or the channel is desired.
688 This value is meaningful only for the BSS (not channel).
698 This value is meaningful only for the channel (not BSS).
734 and may be 0-3.
739 Return whether or not Wi-FI Protected Setup (WPS) is enabled in
760 .Bl -tag -width indent
774 This request causes a running interface operating on an HT channel
797 This request causes a running interface operating on an HT channel
859 Set the desired/current channel to the value given by
862 immediately change to the specified channel if possible;
868 Set the list of available channels using the channel list pointed to by
870 The channel list is a bit vector with bit N set to 1 if
871 IEEE channel number N is available for use.
872 The specified channel list is checked against the set of supported
874 If the intersection of the channel list and the supported channels is empty
877 Note the current channel may be marked invalid after installing a
878 new channel list.
888 Set the current channel using the information referenced by
891 immediately change to the specified channel if possible;
943 Set whether Atheros fast-frames support is enabled using the value in
973 This request causes a running interface to be reset if operating on HT channel.
995 Values must be in the range [0-255].
1138 Note the new regulatory data may invalidate any desired channel.
1140 Set whether or not Reduced InterFrame Spacing (RIFS) is enabled
1143 This setting is meaningful only when operating with 802.11n on an HT channel.
1188 Note SGI is only used when operating on an HT (802.11n) channel.
1215 Values must be in the range [0-slotcnt].
1227 (though values outside the range 1-200ms are unlikely to work well).
1316 Set whether or not Wi-FI Protected Setup (WPS) is enabled using the value in