Lines Matching full:be
13 .\" redistribution must be conditioned upon including a substantially
21 .\" THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
161 passed up the system to be forwarded using some other mechanism.
162 This value will be non-zero when AP bridging is enabled and otherwise zero.
171 would be set to
178 data by requesting zero bytes of data be returned.
210 the minimum time (msecs) a station must be idle
243 Note this data should be used by user applications to map between
261 This value will be non-zero when Countermeasures are enabled and
272 The buffer must be large enough to return the number of available
273 channels but otherwise may be made small to limit how much information
290 cause an event to be dispatched to user applications.
291 This event can be used by the station to adopt that country code and
301 country and power constraint information elements will be present.
308 whether unencrypted packets transmit/received should be discarded.
309 This value will be zero if unencrypted packets will be accepted and
310 non-zero if they are to be discarded.
318 Dynamic WDS is a facility by which packets may be tunneled over normal
332 Packets larger than this value will automatically be split into multiple
346 This value will be non-zero when SSID hiding is enabled and otherwise zero.
357 will be provided and/or accepted.
403 will be returned.
424 module must be installed and enabled or
426 will be returned.
477 When PRIVACY is enabled all data packets must be encrypted.
478 This value will be zero if PRIVACY is disabled and
497 when non-zero, 802.11b stations will not be allowed to associate.
502 when non-zero, legacy (non-11n capable) stations will not be
538 how long (in seconds) results from a scan operation will be considered valid.
568 The MAC address of a single station may be passed in or, if the broadcast
569 address is supplied, information about all stations will be returned.
572 will be returned.
578 will be returned.
644 and may be 0-3.
646 root then the key may be returned as all zeros.
655 This value will be non-zero when support is enabled and otherwise zero.
665 will be returned.
696 When this value is zero frames will be transmitted without waiting for
728 One or both of RSN (802.11i) and WPA elements may be returned.
734 and may be 0-3.
749 cause the interface to be
751 Resets may be handled without altering the state if the parameter
755 is said to be
767 module must be installed and enabled or
769 will be returned.
775 to be reset.
782 This request causes a running interface to be reset.
789 This request causes a running interface to be reset.
798 to be reset.
805 This request causes a running interface to be reset.
818 This request causes a running interface to be restarted if the WPA
826 This request causes a running interface to be restarted.
830 This request causes a running interface to be restarted.
834 This request causes a running interface to be restarted.
839 Set the minimum time (in msecs) a station must be idle
849 This request causes a running interface to be reset.
853 This request causes a running interface to be restarted.
857 This request causes a running interface to be reset.
863 otherwise the interface will be restarted.
877 Note the current channel may be marked invalid after installing a
879 This request causes a running interface to be restarted.
883 This request can only be used when the authentication mode is set
886 will be returned.
892 otherwise the interface will be restarted.
902 module must be installed and enabled or
904 will be returned.
918 This request causes a running interface to be restarted.
929 Set whether unencrypted packets transmit/received should be discarded
935 This request causes a running interface to be restarted.
945 This request causes a running interface to be restarted.
952 This request causes a running interface to be reset.
959 This request causes a running interface to be reset.
966 This request causes a running interface to be reset.
973 This request causes a running interface to be reset if operating on HT channel.
980 This request causes a running interface to be restarted.
988 This request causes a running interface to be reset.
995 Values must be in the range [0-255].
1034 module must be installed or
1036 will be returned.
1046 A Mesh ID can be up to
1091 the roaming mode should be set to manual.
1098 This request causes a running interface to be reset.
1102 This request causes a running interface to be reset.
1112 This request causes a running interface to be reset.
1116 This request causes a running interface to be reset.
1120 This request causes a running interface to be restarted.
1127 This request causes a running interface to be restarted.
1134 This request can only be issued when all interfaces cloned from the
1144 This request causes a running interface to be reset.
1158 This request causes a running interface to be reset.
1163 Set the age (in seconds) that results from a scan operation will be
1170 The underlying device must be running or
1172 will be returned.
1181 If a scan operation is already in progress the request will be
1189 This request causes a running interface to be reset.
1193 This request causes a running interface to be reset.
1200 The string may be at most IEEE80211_NWID_LEN bytes.
1201 This request causes a running interface to be restarted.
1210 Values must be positive.
1211 This request causes a running interface to be reset.
1215 Values must be in the range [0-slotcnt].
1221 This request causes a running interface to be reset.
1226 Slot lengths must be in the range 200 usecs to 1024 milliseconds
1228 This request causes a running interface to be reset.
1236 This request causes a running interface to be restarted.
1238 Set transmit parameters using the data pointed to be
1240 This request causes a running interface to be restarted.
1244 This request causes a running interface to be reset.
1251 This request causes a running interface to be restarted.
1271 This request causes a running interface to be reset.
1305 This request causes a running interface to be reset.