Lines Matching full:in
5 .\" Redistribution and use in source and binary forms, with or without
11 .\" 2. Redistributions in binary form must reproduce at minimum a disclaimer
20 .\" AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
25 .\" IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
26 .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
76 requests that return data to an application place small values in
78 or in a user-specified buffer pointed to by
98 Return whether or not AMPDU is enabled in
112 Return the minimum density for bursting AMPDU frames in
125 Return the limit on the size of AMPDU frames in
134 Return whether or not AMSDU is enabled in
148 Return the limit on the size of AMSDU frames in
156 Return whether AP bridging is enabled in
167 request must identify the frame to return an IE for in
169 For example, to retrieve the IE sent in each Beacon frame
180 Return the current authentication mode in
195 Return the time between Beacon frames (in TU) in
198 Return whether background scanning is enabled in
200 When this value is non-zero and operating in station mode
208 Return in
216 Return in
222 Return in
236 Return whether or not packet bursting is enabled in
246 this directly (e.g. for 900MHz radios, operation in the Public Safety Band).
253 Return the IEEE channel number of the current channel in
259 Return whether TKIP Countermeasures are enabled in
270 Return device capabilities in the data buffer pointed at by
276 Return whether or not Dynamic Frequency Selection (DFS) is enabled in
281 DFS support is mandatory for some 5GHz frequencies in certain
286 Return whether or not 802.11d support is enabled in
288 When 802.11d is enabled in station mode, Beacon frames that advertise
297 Return whether 802.11h support is enabled in
300 the SpectrumMgt bit set in the capabilities field and
306 Return, in
312 Return the period (in beacon intervals) between DTIM events in
315 Return, in
321 Return, in
329 Return, in
331 the threshold (in bytes) for enabling fragmentation frames.
335 Return, in
340 Return, in
348 Return, in
354 In particular the information elements included in management frames
359 Return the setting for automatic promotion of HT channels in
369 Return, in
371 the technique used to protect HT frames in a mixed 802.11n network.
379 Return the maximum acceptable hop count in an HWMP path in
382 Return the setting for Mesh root mode operation in
397 name in the buffer pointed to by
399 and the name length including terminating NUL character in
405 Return whether or not the system handles inactivity processing in
416 (to retrieve the current policy in
428 Return whether or not Mesh AP support is enabled in
431 Return the Mesh ID in the buffer pointed to by
434 Return whether or not packet forwarding support is enabled in
437 Return the link metric protocol in the buffer pointed to by
440 Return the path selection protocol in the buffer pointed to by
446 to retrieve the contents of the routing table in the buffer pointed to by
449 Return, in
451 the Mesh Time To Live (TTL) setting installed in packets
454 Return the number of SSIDs supported in
457 Return the number of WEP keys supported in
460 Return the current powersaving mode in
469 Return the powersave sleep time in TU in
475 Return the current MLME setting for PRIVACY in
481 Return the current 802.11g protection mode in
494 Return whether ``pure 11g'' mode is enabled in
499 Return whether ``pure 11n'' mode is enabled in
505 Return the regulatory state in the buffer pointed to by
508 Return whether or not Reduced InterFrame Spacing (RIFS) is enabled in
512 Return station roaming parameters in the buffer pointed to by
515 Return the current roaming mode in
518 state machine when operating as a station in an Infrastructure BSS.
521 (driver/firmware is in control),
523 (host 802.11 layer is in control),
526 (application is in control).
528 Return the threshold (in bytes) for enabling transmission of RTS frames in
533 Return the current contents of the scan cache in the data area pointed to by
536 Return in
538 how long (in seconds) results from a scan operation will be considered valid.
542 Return whether or not Short Guard Interval (SGI) is enabled in
546 Return the Spatial Multiplexing Power Save (SMPS) setting in
558 Return the requested SSID in the buffer pointed to by
568 The MAC address of a single station may be passed in or, if the broadcast
576 The MAC address of the desired station is passed in; if it is unknown
583 Return the slot number for the station in
585 Slot number zero is the master station in a TDMA network.
587 Return the count of slots in the TDMA network in
590 Return the length (in usecs) of the TDMA slot assigned to each
591 station in the network in
594 Return the number of superframes between Beacon frames in
598 Return whether or not Transitional Security Network (TSN) is enabled in
601 Return whether Atheros Dynamic Turbo mode is enabled in
610 Return transmit parameters in the buffer pointed to by
613 Return the transmit power limit in .5 dBm units in
619 Return the user-specified maximum transmit power in .5 dBm units in
623 Return the current WEP status in
642 The key number is specified in
647 This request is deprecated in favor of
650 Return the number of the WEP key used for transmission in
653 Return whether 802.11e/WME/WMM support is enabled in
657 Return the WME CWmin setting (log2) for the specified Access Class (AC) in
659 The AC is passed in through
667 Return the WME CWmax setting (log2) for the specified Access Class (AC) in
673 Return the WME AIFS setting for the specified Access Class (AC) in
679 Return the WME TxOpLimit (msec) for the specified Access Class (AC) in
686 for the specified Access Class (AC) in
694 for the specified Access Class (AC) in
703 Return the WPA configuration in
714 The request passed in through
725 The request passed in through
730 Return the requested cryptographic key in the buffer pointed to by
732 The key number is specified in
739 Return whether or not Wi-FI Protected Setup (WPS) is enabled in
752 does not affect the MLME state (e.g. RTS threshold), but in some
754 state (including any associated stations); in that case the interface
772 using the value in
780 Set the minimum density for bursting AMPDU frames to the value in
787 Set the limit on the size of AMPDU frames to the value in
795 using the value in
803 Set the limit on the size of AMSDU frames to the value in
810 Set whether AP bridging is enabled using the value in
824 Set the current authentication mode using the value in
832 Set the time between Beacon frames (in TU) to the value in
836 Set whether background scanning is enabled using the value in
839 Set the minimum time (in msecs) a station must be idle
840 before it will do a background scan to the value in
843 Set the minimum time (seconds) between background scan operations to the value in
847 attempt to roam to the value in
855 Set whether or not packet bursting is enabled using the value in
881 Set whether TKIP Countermeasures are enabled using the value in
897 Remove an entry in the MAC address Access Control List (ACL) database using
907 using the value in
916 Set whether or not 802.11d support is enabled using the value in
923 Return whether 802.11h support is enabled using the value in
930 using the value in
933 Set the period (in beacon intervals) between DTIM events to the value in
937 Set whether or not Dynamic WDS support is enabled using the value in
943 Set whether Atheros fast-frames support is enabled using the value in
950 Set the threshold (in bytes) for enabling fragmentation frames using the value in
957 Set whether or not Greenfield preamble use is enabled using the value in
964 Set whether SSID hiding/cloaking is enabled using the value in
971 Set whether or not 802.11n compatibility support is enabled using the value in
978 Set automatic promotion of HT channels using the value in
985 Set the technique used to protect HT frames in a mixed 802.11n network
986 using the value in
993 Set the maximum acceptable hop count in an HWMP path according to
995 Values must be in the range [0-255].
1010 Set whether or not the system handles inactivity processing using the value in
1022 (set the current policy to allow only addresses listed in the database),
1024 (set the current policy to deny addresses listed in the database),
1061 (add an entry for the MAC address specified in
1066 (delete the entry corresponding to the MAC address specified in
1069 Set the Mesh Time To Live (TTL) setting installed in packets
1090 Note when this facility is used for stations operating in infrastructure mode
1093 Set the current powersaving mode to the value in
1100 Set the powersave sleep time in TU to the value in
1104 Set the current MLME setting for PRIVACY using the value in
1110 Set the current 802.11g protection mode to the value in
1118 Set whether ``pure 11g'' mode is enabled using the value in
1125 Set whether ``pure 11n'' mode is enabled using the value in
1141 using the value in
1149 Set the current roaming mode to the value in
1155 Set the threshold (in bytes) for enabling transmission of RTS frames
1156 to the value in
1163 Set the age (in seconds) that results from a scan operation will be
1181 If a scan operation is already in progress the request will be
1186 Set whether or not Short Guard Interval (SGI) is enabled using the value in
1191 Set the Spatial Multiplexing Power Save (SMPS) setting to the value in
1208 Set the interval between Beacon frames to the value in
1213 Set the current TDMA slot to the value in
1215 Values must be in the range [0-slotcnt].
1216 Slot 0 identifies the master in the TDMA network; if it running it will
1219 Set the number of slots in the TDMA network to the value in
1223 Set the length of the TDMA slot assigned to each station in the network
1224 to the value in
1226 Slot lengths must be in the range 200 usecs to 1024 milliseconds
1231 using the value in
1234 Set whether Atheros Dynamic Turbo mode is enabled using the value in
1242 Set the maximum transmit power limit in .5 dBm units to the value in
1246 Set the current WEP mode to the value in
1266 Set the default transmit key used for transmission to the value in
1269 Set whether or not WME/WMM support is enabled using the value in
1273 Set the WME ACK Policy for the Access Class (AC) specified in
1275 using the value in
1278 Set the WME Admission Control Mechanism for the Access Class (AC) specified in
1280 using the value in
1283 Set the WME AIFS parameter for the Access Class (AC) specified in
1285 using the value in
1288 Set the WME CWmax parameter for the Access Class (AC) specified in
1290 using the value in
1293 Set the WME CWmin parameter for the Access Class (AC) specified in
1295 using the value in
1298 Set the WME TxOpLimit parameter for the Access Class (AC) specified in
1300 using the value in
1303 Set the WPA configuration using the value in
1310 Set the requested cryptographic key using data in the buffer pointed to by
1316 Set whether or not Wi-FI Protected Setup (WPS) is enabled using the value in